|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2011 ec300 rectifier
Hello. I had two out of the four wires pull out of the plastic 4 pin connector that plugs into the rectifier. I don't want to mix them up and chance shorting the cdi. Can anyone tell me the order of the wires?! Thank you!! 2011 ec300
Right now I have -red wire/black stripe (on the one end) -next is white wire -yellow wire/green stripe. (Pulled out of connector) -yellow wire. (Pulled out of connector) Thanks!!! |
#2
|
|||
|
|||
I can pull my sidecover and have a look, just not right away. How quickly do you need to know?
__________________
2011 EC250E |
#3
|
|||
|
|||
Red/black
White Yellow/Green Yellow Note their position relative to the latch and you should have no trouble (just in case your rectifier is turned around or on a different angle).
__________________
2011 EC250E |
#4
|
|||
|
|||
Perfect! Thanks so much!
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rectifier for horn? | k1322 | Enduro Electrical & Wiring | 1 | 11-02-2014 03:23 PM |
2013 EC300 E - GasGas Fan Rectifier/Regulator | FDB | Enduro Electrical & Wiring | 2 | 10-25-2014 02:10 PM |
do i need a rectifier? | hotrod | Enduro Electrical & Wiring | 1 | 07-25-2012 05:16 PM |
Regulator/Rectifier Needed | hudson_hollow | Other GasGas Bikes/Quads | 3 | 05-27-2008 10:33 PM |