|
All Other Bikes... KTM, Husky, VOR, Husaberg & Hondayamazuki... |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Grimeca vs AJP master cyclinder
Hi you may of read my other thread about chosing between a TM 144 and a gasser 200. Well i picked the TM which may not help me on this forum haha but the TM one seems to have very little interest.
i love the new bike but the clutch i quite have especially when compered to my old EC 125 it has a grimeca master cylinder and i was wondering if switching to a AJP would help. thanks alot eddy |
#2
|
||||
|
||||
I guess I'm not clear as to what is wrong with the new clutch. Here's my guess. I doubt the master cyl will change any dragging issues you may have. Is the current one adjustable at all? I'm not familiar with the Grimeca, but I hope you sort it. I'd like to hear what you come up with, and a post of a ride report on the TM.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
#3
|
||||
|
||||
There's nothing wrong with how the clutch works mechanically im just been picky and would lick it to be lighter after riding gasser it seems heavy haha
I will get a ride report after i get chance to race the bike 7th of march i think |
#4
|
||||
|
||||
I have wondered why the Gassers have such a light clutch pull. At first I thought it was that they used DOT 4. Then I got another gasser with mineral oil clutch that seemed just as light. I had a Gasser with a Magura clutch master cyl which was also very very light pull. I'm left wondering if the secret is in the springs, or perhaps even the slave cylinder.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
#5
|
||||
|
||||
I'm no expert...but I would think that the piston size, stroke, and the size of the port holes may have something to do with it.....what da think!
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#6
|
||||
|
||||
The problem is caused by the spring that goes on the plunger in the Grimeca master cylinder. The spring that TM supplies in the clutch service kit is too heavy.
__________________
'00 Montesa Cota 315R '13 Husaberg TE 300 |
#7
|
||||
|
||||
ye could well be that was definitely the master cylinder as ive put a AJP on it and its alot better now, still not as light as my old ec 125 but closer now
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
is there a master link? | mountain thumper | Enduro Chassis & Body | 4 | 07-09-2008 05:36 AM |
ASV levers for AJP master cylinder? | colinmc400 | Enduro Chassis & Body | 4 | 06-04-2008 05:56 PM |
Im looking for a Grimeca Hydraulic Clutch | brian27 | General Discussions & Announcements | 3 | 06-21-2007 02:33 PM |
Another Master-link question | FFRDave | Enduro Chassis & Body | 5 | 10-21-2006 07:48 AM |