Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 11-04-2020, 01:24 PM
brads1725 brads1725 is offline
Member
 
Join Date: Aug 2020
Posts: 25
Default 2014 Linkage Kit Part No.

Anyone got a part No. for the linkage bearings and bushings for a 2014 EC250 with the reiger?
Been looking but a few places are showing no stock and I can't pull a decent part no. to search by
Cheers


Reply With Quote


  #2  
Old 11-04-2020, 11:50 PM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

All the bearings are std caged needle roller bearings you can buy at any bearing shop. The bushings are gasgas specific, part numbers are in the parts list. There is a mix of o-rings and traditional seals.

I will check and come back with the numbers later today.
I had no problems sourcing any of the parts last time I rebuilt the rear end, one year ago. I will do it again in a few weeks, but have not bought any parts yet.

Sent fra min YAL-L21 via Tapatalk
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #3  
Old 11-05-2020, 12:23 AM
brads1725 brads1725 is offline
Member
 
Join Date: Aug 2020
Posts: 25
Default

Yeah got the needle bearings and seals all good but no the bushings. 2 were OK but 1 was badly rusted and pitted. Had to re use, will get some new ones ahead of time next time. Got some stuff from europe before, but they are showing no kits available. Hadn't looked into individual as its gets pricey to ship
Reply With Quote
  #4  
Old 11-05-2020, 05:39 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

I had some issues chasing the bushings in my 13 race (same linkage setup). You could size the bushings up and see if any of the after market suppliers have anything or could produce something to meet.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Scorpion linkage to trade for stock linkage rvangeel "Wanted to Buy" & "Want To Trade" 0 06-13-2019 08:25 PM
Linkage repair kit from 2011 will fit to 2014? adriano.ro Enduro Suspension 3 02-15-2017 06:43 AM
2014 300 part out ebay gasgasman Parts 5 11-28-2015 08:16 AM
Linkage part SS109 "Wanted to Buy" & "Want To Trade" 6 11-18-2014 06:00 PM
Morrow County OHV Man Trip 2014 Part Deux firffighter Ride Reports 3 06-20-2014 10:36 PM




All times are GMT -5. The time now is 12:10 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org