|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Linkage bearings!!!
Hi guys!
The link bearings on the rear suspension of my bike are slack! Too much slack! But my bike has only 20 hours... My mechanic said that this is happening frequently in the European premium bikes like KTM, SHERCO, BETA... My GASGAS is the only one in the region, so he did not know how to say if this is also recurring in new GASGAS... In my YAMAHA WR 250 1995 and in my HUSQVARNA 360 2002 I did not even remember that these bearings existed as durable as they were. Has anyone also had this problem with link bearings so recently? |
#2
|
|||
|
|||
is it all of them or just the one at the bottom of the shock? This one always goes quickly if you don't grease it regularly.
I assume the newer bikes don't have the o-ring and washer seal setup. that system works awesome, but not sure what effect it plays on the suspension as it is quite sticky
__________________
2003 txt250 Pro 2013 Ossa 280i |
#3
|
|||
|
|||
Quote:
Grease? 20 hours? Yes, old suspensons have a o-ring and washer seal... Actual bikes do not have. Business... |
#4
|
||||
|
||||
Yes. Many bikes are delivered with almost dry linkage, swingarm and steering bearings. When you buy a new bike, it may be a good idea to take it apart and grease it. Not only Gasgas, but other makes as well.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#5
|
|||
|
|||
Mine has 36 hours (EC 300 2019) all linkage bearings and the floaters are gone west. No rust but just defective
|
#6
|
|||
|
|||
synergy seals used to make teflon bush replacements for the linkage, not sure if they still operate.
have had them in my bike for years now, only the shock bearing that i have to replace (the teflon bush was the wrong size so this one has been normal bearing)
__________________
2003 txt250 Pro 2013 Ossa 280i |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Swingarm & Linkage Bearings | Hulle | Enduro Suspension | 16 | 11-10-2017 06:16 AM |
Ec250 linkage bearings | Scotty97 | Enduro Chassis & Body | 4 | 01-24-2016 11:29 AM |
Ec250 linkage bearings | Scotty97 | Enduro Suspension | 0 | 01-17-2016 04:51 PM |
'12 Linkage and swing arm bearings | seitz331 | Enduro Suspension | 4 | 11-29-2013 06:59 PM |