|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Airbox and gaskets
Been tinkering with my "new-to-me" ride ('06 EC300) and noticed the airbox is relatively useless with regards to keeping water/mud out. Did a quick search and found some use foam etc. in there but is that best? Thinking that woudl reduce air volume. Any suggestions?
Also, I'm going to inspect the clutch and put a new powervalve cover and billet waterpump impeller on from GoFasters. Is this bike all orings or paper gaskets and has anyone found a complete engine set from Cometic or the like? TIA!! |
#2
|
||||
|
||||
I found this top-end kit a while back, but have not purchased from this seller before. Search their site as they also sell bottom-end and other gasket kits.
http://www.powersportsplace.com/part...00?prefilter=1 |
#3
|
|||
|
|||
Sweet, thanks! I'll let y'all know if I get screwed over by them or not! ;-)
|
#4
|
||||
|
||||
I doubt you'll get screwed over by them. It's the power sports division of Summit Racing. I've been ordering race car stuff from them since the early 90's and I've never had an issue.
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
#5
|
||||
|
||||
My favorite go-to parts supplier in the US is Bob Piper at North Tahoe Motorsports. Great to deal with, LOTS of technical knowledge, and I think everything is in stock. If it isn't on the page, email Bob and he'll get you a price. Great guy, he really helped me when I rebuilt my 2002 XC300.
__________________
Phil (New bike pending...) |
#6
|
|||
|
|||
Thanks guys. Any opinions either way on Cometic vs. OEM gaskets?
|
#7
|
||||
|
||||
gaskets
Last complete gasket set I bought was from gofasters
Complete set I dont think it was too much cause i'm a cheap / frugal SOB I'd check with them and they get stuff to you pretty quick,also there are some on ebay from international sellers But i'd trust gofasters 1st Last edited by Stoby; 11-27-2013 at 10:29 PM. Reason: spellin |
#8
|
|||
|
|||
Ok, will do, thanks!
|
#9
|
|||
|
|||
Picked up some gaskets and other things at GoFasters. Thanks for the heads-up.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gaskets? | Harry | Enduro Engine - 2 stroke | 6 | 11-17-2011 11:50 AM |
How to make gaskets | Rabbitist | Enduro Engine - 2 stroke | 5 | 09-17-2011 07:46 PM |
base gaskets | Gassey fan | Enduro Intake/Carburetion - 2 stroke | 2 | 04-29-2010 08:55 PM |
Base Gaskets | Warwick Simpson | Enduro Engine - 2 stroke | 16 | 05-23-2009 08:16 PM |
125 gaskets | noobi | Enduro Engine - 2 stroke | 0 | 04-23-2009 05:08 PM |