Pipe and Silencer options - '03 EC250

[Roosta]

Hi all,

In a bit of a quandry.. My stock silencer has fallen apart, and my pipe has copped a whack cracking and denting it..

I can probably have both repaired however i am interested in checking out some options.. I am in regional Australia so access to GasGas parts is very limited.. Any other models in the likes of FMF or Pro Circuit i should look at..

My bike is road registered thus needs to be quiet, along with powerful..

Cheers..

[jt633]

I think your only option is fmf, or messico or doma

[gasgasman]

Originally Posted by Roosta

I my pipe has copped a whack cracking and denting it..
.

....Huh?

[Rick]

Originally Posted by Roosta

Hi all,

In a bit of a quandry.. My stock silencer has fallen apart, and my pipe has copped a whack cracking and denting it..

I can probably have both repaired however i am interested in checking out some options.. I am in regional Australia so access to GasGas parts is very limited.. Any other models in the likes of FMF or Pro Circuit i should look at..

My bike is road registered thus needs to be quiet, along with powerful..

Cheers..

Try DEP pipes & silencer.

[300ECR]

Hi Rosta where in Oz are you? If you are interested I have a stock pipe and silencer for a 09 300,
I run the fmf and love it, I also have a doma pipe for more open tracks.
The fmf is easier to get there.

[Roosta]

Thanks for the comments guys.. I am located in Albury, nsw/vic border..

300ECR, definately interested.. Shoot me a pm with how much you are after.. Will the '09 300 gear fit my '03 250?

[Fred1956]

Originally Posted by Roosta

Will the '09 300 gear fit my '03 250?

I don't believe so, as my memory serves me- 07-11 are the same but not down to 03

[Roosta]

Bugger..

[Zman]

I was able to get a two different 07 pipes to fit on an 03 and an 04. As I recall I needed to change the silencer inlet pipe angle slightly to get the silencer mounting bolts to line up and also cut a little bit off the Pipe's output where it mates with the silencer as it was a little too long. You might also need to dent the pipe slightly to clear the radiator and or radiator hose. This sounds much worse than it was an it took me about 45 min.

[Fred1956]

Originally Posted by Zman

I was able to get a two different 07 pipes to fit on an 03 and an 04. As I recall I needed to change the silencer inlet pipe angle slightly to get the silencer mounting bolts to line up and also cut a little bit off the Pipe's output where it mates with the silencer as it was a little too long. You might also need to dent the pipe slightly to clear the radiator and or radiator hose. This sounds much worse than it was an it took me about 45 min.

Maybe I should have said 'not a direct fit..." Welder and a cutting torch will make anything fit