![]() |
|
Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
First of all,hello to everyone.Its good to find a good active forum like this for the GasGas.
![]() I have a 2002 ec400fse that I have owned since nearly knew.I used for 2 years regularly and all was ok,except for the well documented starting not being its best feature(managed to kick it just the once). Anyhow after a change of job last year I have been able to use it again in the last 6 months,though the starting has become more of a problem as each week goes by.It finally has stopped starting altogerther(starter turning,but not turning the engine) now,despite a new battery.The forum pointed me to the starter clutch which a check by me has confirmed this. I want to order the upgraded parts from the 2004 model,but can anybody please give me the full list of parts that I need and approx price I am looking at.I phoned a GasGas dealer but they were not able to help me.I want to make sure the parts I am buying will definately fit and be compatible. Any help will be much appreciated. |
#2
|
|||
|
|||
![]()
I think I paid about $225. or more from my dealer, don't know if it was the 2004 upgrade though. Keep a good eye on those very tiny springs, one fell out on me when installing and freaked me out for alittle.
__________________
Bill '03 EC400fse '95 KX 250 |
#3
|
|||
|
|||
![]()
I rebuilt mine myself, it's easy, without having to buy the upgrade.
You can buy the part you need, which is just the cage. From Ringspann,Corporation,Phone #847-678-3583 ringspanncorp.com it's called a freewheel cage, Part #sf44-14.5/20kz It cost me around $100.00, I've installed one and rebuilt another one but have never had a need for it since. You have to keep and use your orginal parts... Good Luck Gasit16 |
#4
|
|||
|
|||
![]()
Thanks all.Spoke to GasGas UK who knew what parts I needed.
Think I will try RingSpann for that part on Monday and go from there. My plan now is to get it running with a new starter clutch then buy the upgraded parts over the next 2/3 months and fit them as well. |
#5
|
|||
|
|||
![]()
if you want the best advise ring colin at Thor motorcycles in Bodmin he sell 70% of all uk enduros knows what he's talking about helped me with a 400 starter sprag issue also the dreaded poor idle he keep just about every part there is
|
#6
|
|||
|
|||
![]()
Thanks.will him give him a ring on Tuesday
![]() |
#7
|
|||
|
|||
![]() Quote:
Dan |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Anyone fitted a carb? & starter clutch question | sgoaty | Enduro Engine 4 stroke (including EFI & Exhaust) | 5 | 05-25-2011 06:02 AM |
Starter clutch / gear problem | iancp5 | Enduro Engine 4 stroke (including EFI & Exhaust) | 12 | 01-28-2011 03:45 PM |
Ec400fse plastic | gaslord | Enduro Chassis & Body | 0 | 08-22-2010 10:32 AM |
2002 EC400FSE Ohlins fork seals | snoopjonnyjon | Enduro Suspension | 4 | 07-19-2010 04:42 PM |
starter on 450 ec | jenkitchen1006 | Enduro Engine 4 stroke (including EFI & Exhaust) | 3 | 05-21-2009 07:38 AM |