Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-15-2022, 10:37 AM
Stoby's Avatar
Stoby Stoby is offline
Bronze Level Site Supporter
 
Join Date: Jun 2009
Location: Franklin,Mass.
Posts: 579
Default 300 Crank ?

Anyone know of or recommend a complete crank to buy?


Reply With Quote


  #2  
Old 08-15-2022, 02:25 PM
Jacob 'Berg Jacob 'Berg is offline
Senior Member
 
Join Date: Mar 2014
Location: Scottsdale, AZ
Posts: 587
Default

You will pay through the nose for a new OEM crank, if you can find one. I would consider having your crank re-built, if possible.

I would try Hall's or Motocenter and see what the cost and lead time are.

Good luck!
Reply With Quote
  #3  
Old 08-15-2022, 02:25 PM
Jacob 'Berg Jacob 'Berg is offline
Senior Member
 
Join Date: Mar 2014
Location: Scottsdale, AZ
Posts: 587
Default

What year is the bike?
Reply With Quote
  #4  
Old 08-15-2022, 09:19 PM
Stoby's Avatar
Stoby Stoby is offline
Bronze Level Site Supporter
 
Join Date: Jun 2009
Location: Franklin,Mass.
Posts: 579
Default

Its an 09 engine that I want to redo since I have gear issue . This is going into my 18 before it blows up (the 18) hopefully. I was just hoping to find a wrench rabbit kit etc.
Reply With Quote
  #5  
Old 08-15-2022, 09:32 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,589
Default

https://www.ebay.com/itm/18548367490...3ABFBMmrW5xNRg
Reply With Quote
  #6  
Old 08-22-2022, 11:59 AM
Jacob 'Berg Jacob 'Berg is offline
Senior Member
 
Join Date: Mar 2014
Location: Scottsdale, AZ
Posts: 587
Default

Just curious why you would not re-build the 2018 motor? Do you plan on changing the mounts on the 2018 frame to accommodate the 2009 motor?
Reply With Quote
  #7  
Old 08-22-2022, 02:10 PM
Stoby's Avatar
Stoby Stoby is offline
Bronze Level Site Supporter
 
Join Date: Jun 2009
Location: Franklin,Mass.
Posts: 579
Default Shite !

that ruins my plans . I didn't know the cases were different from 09 to now. I just want to do a quick swap so my bike isnt sidelined. I had no idea the cases had changed since the middle years. I thought they only changed 03-04ish
Reply With Quote
  #8  
Old 08-23-2022, 12:12 PM
Jacob 'Berg Jacob 'Berg is offline
Senior Member
 
Join Date: Mar 2014
Location: Scottsdale, AZ
Posts: 587
Default

Someone may correct me, but I believe the frame/motor mount design has changed at least three times since 09. 10-11', 12'-17' (may be a change somewhere in this time period as well) and the newest design 18'-present (rieju).

I would start cross referencing parts and see what can be used from the '09 motor. You could use the 09 as a donor motor, which may help with costs and downtime for the rebuild on the '18.
Reply With Quote
  #9  
Old 08-24-2022, 07:04 PM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

A quick check of center case gasket part numbers should tell you if the mounts are in the same spots.
Reply With Quote
  #10  
Old 08-25-2022, 11:39 AM
Jacob 'Berg Jacob 'Berg is offline
Senior Member
 
Join Date: Mar 2014
Location: Scottsdale, AZ
Posts: 587
Default

Center case gasket part #:

2009- ME120144001
2011- ME250544001
2012- ME90000013012
2018- ME94000GG-CLJ-1
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
crank jmdcr50 Enduro Engine - 2 stroke 7 03-26-2015 10:16 PM
Crank Remover and Crank Installer tools for EC250 Fabry Enduro Engine - 2 stroke 5 06-25-2013 08:24 PM
gas gas ec 200 crank chinesegav United Kingdom 5 11-27-2012 07:49 PM
Crank it up! Rick Pictures & Videos 2 04-09-2011 01:36 PM




All times are GMT -5. The time now is 08:34 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org