Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-09-2008, 05:15 AM
nr1strange nr1strange is offline
Member
 
Join Date: Jul 2008
Posts: 1
Default Steel Drive Plates

Hey!

I was in www.halls-cycles.com homepage. and looking after parts to my gasgas ec 250 -00 and I find STEEL DRIVE PLATES moose racing M807104.
then i see it's same too Honda cr 250 90-01, is that right. can i use STEEL DRIVE PLATES from honda..... even if i buy them from another place..

I hope anyone can understand what i mean. my english i bad

Thanks for answer


Best regards nr1strange


__________________
gasgas ec250 -00

Last edited by nr1strange; 08-10-2008 at 05:51 PM.
Reply With Quote


  #2  
Old 08-11-2008, 10:41 AM
Berkyboy's Avatar
Berkyboy Berkyboy is offline
Site Sponsor
 
Join Date: Jul 2006
Location: Minnesota
Posts: 553
Default

We've found that the Moose and Barnett steel clutch plates work best in the older GasGas clutchs, 06 and older.

The newer clutch boss (inner clutch basket), 07 and newer, are made to slightly different specifications and the after market plates may not work. The Moose plates work in the newer basket but are a little tight. The Barnett steel plates absolutely do not work in the newer basket at all.

If you purchase the after market plates don't wait till the last minute to see if they fit as they may not and you may be stuck without a clutch for your next ride if you don't leave enough time to reorder the OEM plates if you need them.
__________________
Steve Berkner

I've attended 21 Six Days as a working Photojournalist
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
steel clutch plates steve Enduro Engine - 2 stroke 3 03-15-2011 10:22 PM
new clutch drive plates dank Enduro Engine - 2 stroke 4 06-23-2010 12:15 PM
GNCC Steel Creek Rick Off Road Racer's Corner 1 03-22-2010 03:24 PM
Final drive chain anathema Enduro Engine 4 stroke (including EFI & Exhaust) 3 04-14-2008 09:44 PM




All times are GMT -5. The time now is 04:46 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org