Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Other Bikes... > All Other Bikes...

All Other Bikes... KTM, Husky, VOR, Husaberg & Hondayamazuki...


Reply
 
Thread Tools Display Modes
  #1  
Old 01-29-2017, 03:48 PM
Moto7man Moto7man is online now
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,549
Default

While I am waiting on some other detailed on the transmission, I am moving ahead with the chassis and other things. I just got some new parts.

Boyesen clutch cover


IMS 3.1 gallon tank, which is giant-enormous.



And front and rear Buchanan spokes
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar

Last edited by Moto7man; 01-07-2023 at 11:20 AM. Reason: Repost photo
Reply With Quote
  #2  
Old 01-29-2017, 03:55 PM
Moto7man Moto7man is online now
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,549
Default

I laced up the 18 and 21 inch rims last night. Somewhat simple, I just ordered a stand so I can true them.

Rear rim. It was cold as heck here last night, so I laced them up in the den while I watched the Grand Tour with Jeremy Clarkson, James May and Richard Hammond.
Front rim
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar

Last edited by Moto7man; 07-19-2017 at 10:19 AM.
Reply With Quote
  #3  
Old 01-29-2017, 03:58 PM
Moto7man Moto7man is online now
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,549
Default

Rear rim complete except for truing,

Front rim,
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar

Last edited by Moto7man; 07-19-2017 at 10:20 AM.
Reply With Quote
  #4  
Old 01-29-2017, 04:00 PM
Moto7man Moto7man is online now
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,549
Default

I tested fitted the IMS tank and this is how she looks so far.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar

Last edited by Moto7man; 07-19-2017 at 10:20 AM.
Reply With Quote
  #5  
Old 01-29-2017, 04:25 PM
chopper chopper is offline
Member
 
Join Date: Feb 2013
Posts: 94
Default

Quote:
Originally Posted by Moto7man View Post

IMS 3.1 gallon tank, which is giant-enormous.


Bike is looking great! Did you want or need the enormous tank? Just thinking that a new Clarke stock capacity in white would give a nice original appearance.
Reply With Quote
  #6  
Old 01-29-2017, 09:37 PM
Moto7man Moto7man is online now
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,549
Default

I was thinking the same thing and I am kinda on the fence right now about it. I could not find an IMS tank bigger than the stock tank without going to the 3.1.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #7  
Old 01-30-2017, 10:41 AM
hadfield4wd hadfield4wd is offline
Senior Member
 
Join Date: Oct 2015
Location: Roanoke, VA
Posts: 852
Default

This bike is gorgeous. I'd almost hate to ride it...almost.
__________________
Matt

1999 GG EC 250 Six Days
1999 Cagiva Gran Canyon
2001 Aprilia Falco
2001 Triumph Speed Triple for my 20 year old
2000 GG XC250 for my 20 year old
2003 Honda Rancher 350 for the wife
Reply With Quote
  #8  
Old 01-30-2017, 06:23 PM
Moto7man Moto7man is online now
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,549
Default

Quote:
Originally Posted by hadfield4wd View Post
This bike is gorgeous. I'd almost hate to ride it...almost.
Thanks very much...I am going to ride it ....a lot.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #9  
Old 02-09-2017, 08:59 AM
Moto7man Moto7man is online now
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,549
Default

The backgrounds with numbers just arrived from Decal Works, I put them on last night. I just shipped the suspension off to Drew Smith and Mike at Works Enduro Rider. The golds cad plated bolts, axles and the rebuilt repainted radiators should be here on Friday and some stuff will be here next week.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar

Last edited by Moto7man; 07-19-2017 at 10:20 AM.
Reply With Quote
  #10  
Old 02-20-2017, 08:02 AM
Moto7man Moto7man is online now
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,549
Default

I got some work done this weekend. The bolts and axles were cad plated.


I got a new truing stand which worked great. I just need to go over the wheels with a torque wrench then install the galfer rotors, tubliss and tires.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar

Last edited by Moto7man; 07-19-2017 at 10:21 AM.
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
DC conversion - not floating ground johnm Enduro Electrical & Wiring 39 03-04-2020 11:11 AM
Gas Gas Contact Jt 25 95 Restoration And Help Eyetech General Discussions & Announcements 1 03-18-2016 03:33 PM
2001 XC200 Restoration Project Lincolnlock Enduro Engine - 2 stroke 19 04-22-2014 03:42 PM
Hanging Idle after wide open GasGas Enduro Intake/Carburetion - 2 stroke 10 09-06-2013 04:13 PM
My Stomping ground swazi_matt Ride Reports 10 03-02-2011 09:35 AM




All times are GMT -5. The time now is 09:12 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org