![]() |
|
Enduro Product Reviews Feedback & Comments on Products Tested |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I have a 2005 gasser EC 250 thats well on its way to getting a 300cc upgrade. My "05" has all of the LTR goodies except for the exhaust spigot. I also had the Squish-band sdjusted at RBD.
Is a 2004 Gasser completely interchangable with a 2005 Gasser ? Last edited by FFRDave; 12-13-2007 at 10:00 PM. Reason: too big |
#2
|
|||
|
|||
![]() Quote:
Think its Enduro and Motocross. Jetting is different, and wiring harness should also be different (note; more wires to EC; lights, blinkers etc.) Suspension should also be setup some different, or other shocks. Other than that, the same.
__________________
07` EC300SM. 09` KTM 250EXC. 70`CB350 |
#3
|
|||
|
|||
![]()
If you are doing a full motor swap it won't work the bottom motor mount is different from 04 to 05
I actually have an 05 frame setup for an 04 motor in the basement |
#4
|
|||
|
|||
![]()
It is my understanding that they made a small change to the frame geometry going from 04 to 05.
Pretty sure the MC's have four speed transmissions. My 04 is a DE (Dealer Edition) and came with the mx ignition. Around this time they gave the dealers some options on how they wanted the bikes so they were not all exactly the same. Some had lights, some didn't. I would think that swapping top ends would not be a problem. |
#5
|
||||
|
||||
![]()
The main thing to remember with GasGas is that the model, can mean something but more typically means little.
__________________
2013 GasGas 300 2004 GasGas 200 2011 GasGas 300 Ortonville Minnesota |
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
"attn." "new England Boys" | RONALD BRUNDIGE | General Discussions & Announcements | 9 | 11-17-2008 09:19 PM |
"B" piston in an "A" bore? | Kokanee | Enduro Engine - 2 stroke | 6 | 09-04-2006 08:10 PM |
Recommendation: add "Injury/Recover" and "Riding Techniques" sections | MattR | Suggestion Box | 2 | 07-18-2006 10:19 PM |