Clutch Basket Crossover

[eff]

My clutch basket broke last weekend. I currently have a line on a used basket, but also want to look at all my options. Stock baskets are expensive and none in the US as far as I can tell.

Has anyone ever used a CR250 basket? I have heard rumors that they may work and was wondering if it was ture.

Thnks,

Ed

[Cruiser]

I would also like to know,, my 97 gg has some time on it and the knotches are worn deep...

[Hamish]

off topic a little here, but does anyone know what other clutch plates (steels and fibres) will fit a 09 EC300R? Assume the R and std models have the same clutch

[stainlesscycle]

cr250 fibers will fit, but they are thicker than stock ones by at least .1 mm each.. i've not had a chance to get a set and mix and match and see if stack height is manageable..

[Hamish]

thanks for that, apparantly the cr250 steels fit, have a set of them on the way so will post up when I know the answer

[stainlesscycle]

if you can make cr250 steels and fibers work together and end up with a manageable stack height, that would be awesome.

[mxdj2003]

81 cr450 fibers are the same thickness, so are cb650 fibers

[Hamish]

cr250 steels also fit, but need aftermarket ones as stock ones are ally

[stainlesscycle]

i ordered a cr250 clutch kit - plates and steels - we'll see how it goes.

[Rick]

I replaced my fiber and steel plates 2 years ago. I ordered a Barnet kit from Go.Fasters...seems to be working just fine. The basket looked really good for it's age...