|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Flywheel removal....Thread size.
Hey Guys,
I am about to do the floating ground setup for my Ec300 and will be buying a flywheel puller but cannot remember the thread size that the puller needs to be. Can anyone remember or do they have one they do not need anymore? Cheers Mark. |
#2
|
||||
|
||||
Since the ingition is the same as KTM uses, I think any KTM puller will work.
__________________
2004 GasGas DE250 |
#3
|
|||
|
|||
2-stroke Kawasaki KX, almost all size bikes use the same from 80 up to the old 500's and that is what fits GG. Do a search for "puller", I posted once with (I think) part numbers and thread sizes.
here, I'll save you the time.... This isn't much but I hope it helps someone, I know I spent considerable time researching it. Flywheel puller for GG 2T (works on both my bikes) is "Magneto/Flywheel/Rotor Puller. 27mm x 1.0mm fine left hand threads. Kawasaki flywheel puller. Most off road and MX and Enduro models. 2 cycle 80 MX to late 500 MX models and KDX Enduros." This from Ricky Stator website. I bought a K & N brand puller (air filter folks) from the local Kawasaki dealer for $30 and it works perfect, part #82-0150.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) Last edited by jostby; 12-11-2009 at 01:16 PM. Reason: added info |
#4
|
||||
|
||||
Yes, its the common Kokusan flywheel puller. I have a couple of them. One is repackaged as a KTM part in the box with #6 276 807 if that makes things eaiser. That part# is about 10 yrs old.
|
#5
|
||||
|
||||
Quote:
A good handy bit of info there jotsby. I will be going to the local kwaka shop asap. Cheers Mark |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
My Go Pro HD Thread | SideshowBob | Pictures & Videos | 18 | 04-25-2011 03:07 PM |
Is the flywheel nut a left hand thread on my 300? | bergerhag | Enduro Engine - 2 stroke | 4 | 10-15-2010 11:35 AM |
Flywheel Removal | BOBBYPRUIETT | Enduro Engine - 2 stroke | 3 | 04-08-2010 12:16 AM |
thread | jriley43 | General Discussions & Announcements | 15 | 03-17-2010 03:51 PM |
Flywheel removal | jyellard | Enduro Engine - 2 stroke | 4 | 03-20-2009 03:45 PM |