|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
yet more problems
bike broke down saturday, it cut out and would not start from kicking it over but a nice long hill in second got it started, it ran for about 5-10 minutes and cut out again woudnt start from either kick or bump, changed the plug and still no joy no spark, got the bike home checked all the wiring and all seemed fine, took the stator out and it was very dusty and rusty on the metal plates out the edges of each coil, i cleaned them all up and bike started very easy and reved and idled perfect... i didnt ride it just had it running in the garden and put it away, i got it out today to take it for a test run and soon as i started the bike it idled like a terrible and had trouble reving out so i slowly took it for a ride down the street and it seemed to get slightly better but then it cut out and now wont restart
ive looked at the factory manual on the ohms reading the stator should be impulse coil 100 Ω +/- 20% mine is 101 Ω exciter 12.7 Ω +/- 20% mine is 1. Ω charge coil yellow-earth 0.67 Ω +/- 20% mines is .001 white-yellow 0.16 Ω +/- 20% mine is .000 |
#2
|
||||
|
||||
You may have an ignition coil breaking down.
Check the kill switch also. |
#3
|
|||
|
|||
i check the kill swith, basicly i stripped the loom down so it was only the engine loom but without the kills witch still no joy
|
#4
|
||||
|
||||
I'd try cutting a 1/4" off the end of the spark plug wire.
__________________
'11 GG Six Days 250 |
#5
|
|||
|
|||
ive took abit off the end and no joy, took abit off the other end and still no joy
|
#6
|
||||
|
||||
Some of your posted stator values look much too low to me.
__________________
-Mike 2009 Beta Evo 300 4T - 1982 Suzuki PE175 |
#7
|
|||
|
|||
yes they do so ive ordered a new stator kit so finger crossed the bike will come to life as i was looking foward to going out this weekend !
|
#8
|
||||
|
||||
Any update?
__________________
-Mike 2009 Beta Evo 300 4T - 1982 Suzuki PE175 |
#9
|
|||
|
|||
I also really wanna know what it was? Did the stator fix it, or was it still a bad ignition coil?
|
#10
|
||||
|
||||
Two weeks ago down in Hancock my bike was running like crap. We thought it might be the stator we ended up changing the spark plug cap. After that it ran perfect
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
250 f jetting problems | sfiegen | Enduro Engine 4 stroke (including EFI & Exhaust) | 5 | 12-15-2011 06:45 PM |
Engine problems????? | mark250ec | Enduro Engine - 2 stroke | 13 | 09-16-2011 07:09 AM |
07 EC 200 Jetting problems | cooganbr | Enduro Intake/Carburetion - 2 stroke | 4 | 08-15-2008 04:29 PM |
03 300 Problems | Ryan#87 | Enduro Engine - 2 stroke | 3 | 06-15-2008 10:28 AM |
06' ec 200 problems | speed addic | Enduro Engine - 2 stroke | 0 | 02-25-2007 06:44 PM |