|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
cdi chart?
anyone have a chart or a basic idea of which cdi boxes advance when?
i would assume the mc cdi's have the most aggressive advance curve? or the 125's or the 200's?? i would assume the ec300's have the tamest cdi? or which cdi's are the most aggressive, and which are the least?
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com |
#2
|
|||
|
|||
problem is that GG used CDI's from different bikes (200, 250, 300) to change the characteristic of the different models (EC, XC, DE, MC, etc) of the 200, 250, and 300. At one time there was different color heat shrink used on the wiring where it entered the CDI unit and that was a clue. But I don't know what color was for which unit.
My '00 XC250 has an aggressive CDI and at one time I think I determined it was the same as used on the MC's. My kids EC is very different. Much smoother.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#3
|
||||
|
||||
what i'm trying to figure out is this - i have a de or xc 200 (2000) not even sure if it's de or xc - and i was hoping to find a bit more aggressive curve, i basically wanted to get a baseline to see which cdi i had...
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com |
#4
|
|||
|
|||
My XC is referenced on the serial number stamped on the steering head. And my kids bike is an EC and that is what is stamped on his so you should be able to tell by looking at the serial number. On the 250's back then I think they used 2K2 ignitions on the XC's and 2K3 on the EC's but I'm unsure of the 200's.
The 2K2 wiring exited the flywheel cover at 10 o'clock, the 2K3 at 2 o'clock.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#5
|
||||
|
||||
my bike came with 2k2. i've got 2k1 in there now. xc vin
so is there a more aggressive curve cdi than my 200xc came with?
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GasGas Spec Chart for U.S. : | webmaster | General Discussions & Announcements | 16 | 10-12-2010 09:56 AM |
EC300 dyno chart | alecsstefan | Enduro Engine - 2 stroke | 0 | 01-25-2010 04:56 PM |
Dyno Chart | Grampy | Enduro Engine - 2 stroke | 1 | 12-17-2008 08:56 PM |
Spring rate chart. | ktmguy23 | Enduro Suspension | 1 | 05-09-2007 08:37 AM |
weight/spring rate chart?? | skid jackson | Enduro Suspension | 0 | 09-21-2006 10:13 PM |