Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-06-2013, 11:00 AM
Bandit9's Avatar
Bandit9 Bandit9 is offline
Platinum Level Site Supporter
 
Join Date: May 2007
Location: Lafayette, La.
Posts: 654
Default What did you do to your Gas Gas today?

In the WR450 Forum I used to frequent, there was a "What have you done to your bike today" thread is really good for getting ideas for mods or for problem solving. It's also great for posting pics of anything related to riding or working on bikes. Let's get one going here.

I'll kick it off with my hardware store $1.00 seat bolt "through the top" conversion mod for my 12 300. I got my idea from Stu. The bolt is a stainless button head 40mm long same dia and pitch as stock. Two aluminum fender washers and a stainless nylon lock nut. Drilled from under the seat through the existing hole, then screwed bolt and washer down from top using RED Loctite. Then just use the nylon lock nut and other alum fender washer. Works great and that seat isn't coming off because of anything to do with the bolt. There is a fancy kit with anodized red cup washer you can get, but it's hard to beat $1.00 and having it done now and not waiting for shipping.
[ATTACH ]3982[/ATTACH]
Attached Images
File Type: jpg image.jpg (121.2 KB, 402 views)


__________________
Blanco

Current ride: 2009 WR450

Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F
Reply With Quote


  #2  
Old 12-06-2013, 11:01 AM
Bandit9's Avatar
Bandit9 Bandit9 is offline
Platinum Level Site Supporter
 
Join Date: May 2007
Location: Lafayette, La.
Posts: 654
Default

Pic of the underside.image.jpg
__________________
Blanco

Current ride: 2009 WR450

Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F
Reply With Quote
  #3  
Old 12-06-2013, 12:08 PM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 956
Default

I installed a set of Red plastics on the 250 and sent the 200's suspension off to Drew Smith.
Reply With Quote
  #4  
Old 12-06-2013, 12:20 PM
Stoby's Avatar
Stoby Stoby is offline
Bronze Level Site Supporter
 
Join Date: Jun 2009
Location: Franklin,Mass.
Posts: 579
Default legal

Today I got mine plated!!! And ordered some powermadd winter handguards
Stoby
Reply With Quote
  #5  
Old 12-06-2013, 12:51 PM
Bandit9's Avatar
Bandit9 Bandit9 is offline
Platinum Level Site Supporter
 
Join Date: May 2007
Location: Lafayette, La.
Posts: 654
Default

Quote:
Originally Posted by Stoby View Post
Today I got mine plated!!! And ordered some powermadd winter handguards
Stoby
Sweet!

I find it odd that in a Liberal Blue state it is easier to get a off road bike plated than down here in La.
__________________
Blanco

Current ride: 2009 WR450

Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F
Reply With Quote
  #6  
Old 12-06-2013, 01:05 PM
wrench's Avatar
wrench wrench is offline
Gold Level Site Supporter
 
Join Date: Mar 2010
Location: GA
Posts: 292
Default

I went out to the garage and looked at mine twice so far ... does that count?

Last week, I swapped out the ignition coil/wire for the one from my 94 YZ 250 [direct bolt up w/change of wire connector] so that I could use the Nology wire that I liked so much & installed some '07 shrouds that really made it look better. Now my 01 and 03 look the same and "newer" than they are.
__________________
2003 GG 300EC/DE [Ohlins]
2001 GG 250XCSOLD
Reply With Quote
  #7  
Old 12-06-2013, 01:36 PM
bkwdc's Avatar
bkwdc bkwdc is offline
Gold Level Site Supporter
 
Join Date: Dec 2012
Location: Knoxville, TN
Posts: 613
Default

Put a sticker on side cover. Therefore, is now faster. $0.49
__________________
2011 EC300 Six Days
2010 EC300 Nambotin Replica
Reply With Quote
  #8  
Old 12-06-2013, 01:56 PM
Stoby's Avatar
Stoby Stoby is offline
Bronze Level Site Supporter
 
Join Date: Jun 2009
Location: Franklin,Mass.
Posts: 579
Default Not easy

Its not easy to find a plateable 2t here Basically only reason I bought it was that its illegally legal or vice versa.Really didnt need another bike! You find them once in awhile usually ex race bikes that I think had a few strings pulled via dealers importers etc.
It still took a cop coming to my house and 3 trips to the registry
So not easy
Reply With Quote
  #9  
Old 12-06-2013, 03:37 PM
bowhunter007's Avatar
bowhunter007 bowhunter007 is offline
Senior Member
 
Join Date: Mar 2012
Location: Tacoma, Washington
Posts: 976
Default

Quote:
Originally Posted by bkwdc View Post
Put a sticker on side cover. Therefore, is now faster. $0.49
I throw all the stickers that come with various parts in a box. Now I'm gonna paste them all over my bike. LOL!
__________________
All healed up, and ready to burn some fat.
Reply With Quote
  #10  
Old 12-06-2013, 03:39 PM
bkwdc's Avatar
bkwdc bkwdc is offline
Gold Level Site Supporter
 
Join Date: Dec 2012
Location: Knoxville, TN
Posts: 613
Default

Be careful. Tooo fast?
__________________
2011 EC300 Six Days
2010 EC300 Nambotin Replica
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
DNF today Pepperami Enduro Chassis & Body 6 09-18-2013 11:59 AM
Got my first GG today! RonMexico General Discussions & Announcements 6 02-19-2011 12:39 PM
Went Riding Today and..... coolum74 Enduro Engine 4 stroke (including EFI & Exhaust) 2 11-30-2008 01:12 PM
HELP! I tried to use my gasgas as a jet ski today! sammyj18 General Discussions & Announcements 19 11-21-2008 08:01 PM
SHNF From Today Boomhauer Pictures & Videos 13 10-30-2007 04:18 PM




All times are GMT -5. The time now is 12:53 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org