|
|
|||||||
| Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
|
Thread Tools | Display Modes |
|
#1
04-25-2018, 03:27 PM
|
|||
|
|||
Stuck front brake pin
I was going over my new to me 2010 EC300 and was going to replace the allen brake pins with the good ones you can put a wrench or socket on but I am too late for the front one. Before it was totally stripped I pounded hard with an impact wrench, nothing doing.
Any suggestions? I don't have a welder and the JB weld trick won't work if the beating it took from the impact driver didn't loosen it. Any advice appreciated. Trailrider 
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2010 EC 300 front brake | Olliesherman | Enduro Chassis & Body | 8 | 05-26-2016 08:34 AM |
| front brake pin siezed in ? | britishgas | Enduro Chassis & Body | 1 | 11-22-2013 02:17 PM |
| Front Brake Mod | GasGas | Enduro Chassis & Body | 3 | 09-19-2013 06:33 PM |
| stuck front axle | roughside | Enduro Chassis & Body | 5 | 01-08-2012 07:12 PM |
| Front Brake Lever | cladoo | Enduro Chassis & Body | 4 | 02-07-2007 08:45 AM |
Threaded Mode