Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Classified Advertisements > "Wanted to Buy" & "Want To Trade"

"Wanted to Buy" & "Want To Trade" Bikes or Parts


Reply
 
Thread Tools Display Modes
  #1  
Old 03-26-2018, 02:46 PM
barbotte barbotte is offline
Member
 
Join Date: May 2017
Posts: 54
Default part for ec 300

hello i was wondering how much would those part cost for my 2014 ec 300
and where can i get them

piston assy and SE bearing
gasket assy complete with seal
crank bearing.. mag ,,pto
crank seal ,, mag,, pto
front sprocket.. clip in and out
water pump shaft
water pump seal
water pump impeller
water pump bearing
i hope some of them come as a kit
thanks


Reply With Quote


  #2  
Old 03-27-2018, 12:48 PM
gasser's Avatar
gasser gasser is offline
Senior Member
 
Join Date: Nov 2006
Location: Cookeville, TN
Posts: 1,458
Default

Pistons and gaskets are easily found on ebay. Seals and bearings can be found locally at places that specialize in those (you will need the sizes that you can find at http://www.gasgasmotos.es/en/manuals.html. I would get all water pump items straight from a dealer. I usually use Hall's but there are other fine dealers you can find on the forum that ship parts.
Reply With Quote
  #3  
Old 03-27-2018, 02:39 PM
gasser's Avatar
gasser gasser is offline
Senior Member
 
Join Date: Nov 2006
Location: Cookeville, TN
Posts: 1,458
Default

On http://www.gasgasmotos.es/en/manuals.html look under the "exploded" header. Exploded is gasgas talk for parts breakdown. It will be a column of what looks to be little green or grey sprockets. If it is green then they did a breakdown for that year/model. If it is grey for your year model go to the closet year that is green.
Reply With Quote
  #4  
Old 03-28-2018, 06:20 PM
barbotte barbotte is offline
Member
 
Join Date: May 2017
Posts: 54
Default

thank for the info
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
GG pro part to fit EC gassergrant Enduro Engine - 2 stroke 4 08-24-2012 03:35 PM
Fse Part , What is it , and where is it from ??? Gerko Enduro Engine 4 stroke (including EFI & Exhaust) 7 02-06-2011 07:12 PM
To part it or not? PEB General Discussions & Announcements 2 10-02-2008 05:03 PM




All times are GMT -5. The time now is 09:13 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org