|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Nissin Brake Caliper Pad Holding Shim
Trying to find the metal shim that holds the brake pads in on the front caliper.
GG part# BE250022064 Does not seem to be available through Gas Gas, but I cannot find anywhere that sells Nissin caliper parts either.
__________________
Sponsors: http://www.evolutionsuspensionproducts.com/ http://www.sportbiketrackgear.com/ Blog: http://www.speedofarrival.com/ |
#2
|
||||
|
||||
Hmm, can't definitively help but week before I bought the pad end clip for rear caliper from Honda shop as they use Nissin. Just looked up an online fische and guessed. Was cheap so not huge risk.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#3
|
||||
|
||||
Newer GG part# is BE620122508 witch replaces the older GG part# BE250022064 you are looking for. Maybe give that a try thru your dealer, it should be very cheap so no biggie if they don't interchange (even tough they are listed to interchange on motocrosscenter, which never failed me).
__________________
'14 EC300 Last edited by poelinca; 03-28-2018 at 09:43 AM. |
#4
|
|||
|
|||
Quote:
__________________
Sponsors: http://www.evolutionsuspensionproducts.com/ http://www.sportbiketrackgear.com/ Blog: http://www.speedofarrival.com/ |
#5
|
||||
|
||||
don't get me started on the whole motocross center issue. again......
Hop on a Honda or Yamihaha parts web site as these same parts cross over to the Crf and YZ bikes that use the same brake pads. |
#6
|
||||
|
||||
Quote:
Braking components, throttle assemblies, suspension bushings and seals, all can be had through Honda/Yamaha at much better prices and availability. |
#7
|
||||
|
||||
Quote:
To be fair it's has gotten better over the years.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#8
|
||||
|
||||
Didn't we get there in post 2? We should listen to that guy, he sounds cool.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#9
|
||||
|
||||
As I recall Motocross Center is not refusing to sell to the US as much as they are prohibited by GG from selling to the US.
|
#10
|
|||
|
|||
Honda part 43112-KZ4-J41
Just bought a second gasgas and this bit was missing. On the first one it had been run forever without it, ended up sticking it on with epoxy to also fill the grooves made by the pads.
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Nissin MC with Brembo caliper? | Tomac | General Discussions & Announcements | 0 | 09-18-2016 05:11 AM |
2002 EC300 front brake caliper (Nissin) | Diedrix | "Wanted to Buy" & "Want To Trade" | 8 | 07-29-2014 12:48 PM |
nissin caliper chocking ? | britishgas | Enduro Chassis & Body | 1 | 04-16-2014 05:41 AM |
Nissin front caliper/M.cyl. NEW | john r b | Parts | 0 | 03-21-2014 03:49 PM |
'06 EC300 Nissin Front caliper | brider | Enduro Chassis & Body | 7 | 12-01-2012 02:09 AM |