|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
triple clamps
hi all,first time on here,does anyone know what triple clamps are compatable with a 2009 gasgas 300 ec?there dont seem to be any after market ones available and im pretty sure they will be the same as another bike,thanks in advance
|
#2
|
||||
|
||||
My BRP triple clamps are from a YZ 250. They fit very tight on the steering stem. If I had it to do over again, I would have kept the stock clamps on and figured out a way to do an under bar mount on my own. Perhaps even the BRP under bar mount would work with the stock triple clamps.
I'm not sure, but I'm finding that stock is usually better than anything you can buy unless you are doing something very specific. For instance: Pivot pegs, ODI clamp on grips, etc.. Bling is a waste of time and money. One time I purchased a super trick set of triple clamps for my Husqvarna WR 125. They changed the way the bike felt, and not in a good way.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
#3
|
|||
|
|||
triple clamps
thanks,i had a rush of blood to the head,it was just a bling thing!!.will be leaving standard clamps on.
|
#4
|
|||
|
|||
In my opinion, the best money you can spend on a bike is on the suspension.
__________________
2018 XC300 |
#5
|
|||
|
|||
triple clamps
Very wise,fortunatly my bike is fully sorted suspention wise.just fitted the 2011 plastic kit and a one off graphics kit.talon carbon fiber hubbed wheels.just gone back to two stroke after 6 long years on fourstroke ktm.and the gas gas is awesome,considering the flex bars from mousse as i have perminant damage in left hand and wrist from mx crash,any experiance with these bars?
|
#6
|
||||
|
||||
Quote:
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro |
#7
|
|||
|
|||
wheels
they are available from Talon Uk,the hubs are alloy on bearing and spoke mounts with a carbon fibre centre,red anodised hubs with the carbon in centre.look really nice.More bling but very nice.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Torque value for Triple Clamps? | binsel | Enduro Suspension | 7 | 03-21-2011 08:42 AM |
Milling out triple clamps? | Cruiser | General Discussions & Announcements | 3 | 01-20-2010 08:53 PM |
Bitchin' triple clamps available?! | robinator | Enduro Suspension | 0 | 05-08-2009 09:43 PM |