GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 02-01-2008, 04:55 PM
loganlexow loganlexow is offline
Member
 
Join Date: Jan 2008
Posts: 6
Default Wheel X-over

Hey Guys,

This is my first post and first Gas Gas. I am super excited, however, I am curious about wheels. I plan on converting my 01 EC250 over to supermoto but want to save my stock wheels for trail riding. I have searched on here and so far the consensus is that the hubs are Gas Gas specific. I found that Moto520 converted a rear KTM wheel using the Brembo brakes, but he did not say anything about the front wheel or whether the stock brakes would work. Is there any help on this or am I stuck lacing my stock hubs? Thanks very much for your help!

Logan
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Will anything other than a GG rear wheel fit on a GG? cal_tony Enduro Chassis & Body 7 10-02-2013 11:20 PM
Will anything other than a GG front wheel fit a GG? cal_tony Enduro Chassis & Body 7 11-08-2008 09:21 AM
Need a wheel for 99 EC300... ricegas Enduro Chassis & Body 4 10-20-2008 07:54 PM




All times are GMT -5. The time now is 08:33 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org