Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 07-24-2012, 08:13 PM
RD350 RD350 is offline
Member
 
Join Date: Feb 2012
Posts: 14
Default Stock settings for '99 EC200? HELP!

Just rebuilt the front and rear suspension to stock specs, no revalving. I found the manual for the front marzocchi forks, conventional. It says to not go farther then 2 clicks from the factory setting in either direction.

What is the stock factory settings?

I don't have a manual for the ohlins rear shock. Does anyone know where to start with it?
Reply With Quote
  #2  
Old 07-24-2012, 08:16 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

I'd count all the clicks and start somewhere around the middle. Start slow and dial it in with the feedback the bike gives you.
Reply With Quote
  #3  
Old 07-25-2012, 07:54 AM
RD350 RD350 is offline
Member
 
Join Date: Feb 2012
Posts: 14
Default

Thats what I've been doing. What to see where I am according to where gas gas thinks I should be.

The front feels a bit harsh/stiff/firm in the middle of the compression adjuster. Went out 3 clicks from centered and it is better but not as soft as I like it. At 5 clicks out, from centered, on compression it starts to get a nervous slight head shake.

Also, the front wants to washout. No grip in corners front slides all over the place. I run S12s that are still very good, only about 2 hrs on them.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2010 Sach stock suspension settings? 007neil Enduro Suspension 4 06-20-2012 02:14 PM
Stock 2012 ec 300 race stock clicker settings please. bones150 Enduro Suspension 0 05-13-2012 08:16 PM
02 ec 200 stock settings Airborne Enduro Suspension 0 06-24-2007 07:49 AM
03 ec 200 stock settings? Airborne Enduro Intake/Carburetion - 2 stroke 0 06-24-2007 07:45 AM




All times are GMT -5. The time now is 08:12 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org