Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 06-19-2009, 09:09 AM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default Zokes oil level?

Manual says approx 670cc oil for 45mm shivers. Is that per tube or total?
Thanks


__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote


  #2  
Old 06-19-2009, 02:58 PM
rpduc rpduc is offline
Senior Member
 
Join Date: Feb 2008
Location: Minnesota
Posts: 419
Default

The Shiver manual says 610cc for the 45mm and 90mm oil height (air gap). That would be per fork not total. The exact cc measurement is not all that important anyway.

Maybe you already know this but the 610cc bit will only get you sorta close. You have to measure air gap to get the right level.

I have 50mm Zokes, so no direct FHE but most of the comments I've seen here recommend more like 110mm oil level on the 45s. If you look around there are some pretty extensive threads on tuning those 45mm Zokes.
__________________
Ross
'05 MC 250
'91 Husky 610wxe
'04 Duc M800 R.I.P
'06 Duc S2r 1000 R.I.P
'07 Duc S2r 1000 still rubber side down...
----------------------------------------------------------
May be so... May be not so...

My Website
Reply With Quote
  #3  
Old 06-20-2009, 11:29 AM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

Thanks. I had downloaded the manual from the Marzocchi site and it didn't have much info. I didn't check this site first! Right from the front page of GGRC links is a much better Zoke manual which explained it all in a much easier format. Also found a referance to Les at LTR suggesting using 125-130mm air gap in the shivers instead of the recommended 90mm.
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to set float level. Revisited. gasgasman Enduro Intake/Carburetion - 2 stroke 48 11-10-2018 05:11 AM
Fork oil level ? Brian VT Enduro Suspension 4 03-10-2009 08:57 PM
5000-7000 ft. above sea level (jetting) Link Enduro Intake/Carburetion - 2 stroke 7 03-25-2008 01:45 PM
WP Fork Oil Level MattR Enduro Suspension 11 08-02-2006 10:40 AM




All times are GMT -5. The time now is 04:31 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org