Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-07-2023, 03:53 PM
Bigboresrule Bigboresrule is offline
Member
 
Join Date: Feb 2021
Location: Pecatonica, Illinois
Posts: 6
Default Rieju ranger horn wiring?

Bought a 2021 300 ranger the switch on left handle bar shows a horn button along with turn signal switch. I believe behind head light I've found the turn signal wires but can't locate the horn wiring and have pulled the tank to see if the wires are there. I've found a pre ktm gas gas wiring diagram and see the horn and turn signal shown. The Rieju manual I got does not show any wiring nor mention horn wiring. Any one been down this road?


Reply With Quote


  #2  
Old 01-10-2023, 04:01 AM
ditezz ditezz is offline
Member
 
Join Date: Apr 2010
Posts: 76
Default

The entire switch wiring goes to a plug behind the headlight.That will have the starter ,indicators ,horn ,headlight high/low.The owners manual clearly shows tall this
Reply With Quote
  #3  
Old 01-10-2023, 04:08 AM
ditezz ditezz is offline
Member
 
Join Date: Apr 2010
Posts: 76
Default

Manual Usuario MR300 ING V1.3.pdf
Reply With Quote
  #4  
Old 01-10-2023, 04:10 AM
ditezz ditezz is offline
Member
 
Join Date: Apr 2010
Posts: 76
Default

Look on page 16
Reply With Quote
  #5  
Old 01-22-2023, 10:51 AM
Bigboresrule Bigboresrule is offline
Member
 
Join Date: Feb 2021
Location: Pecatonica, Illinois
Posts: 6
Default

I will check page 16, looking at switch I believe a gray and a red wire come from switch go behind headlight area into the main wiring loom. I was not able to see them come back out of harness until the battery area. I clearly see 4 wires behind headlight that would appear to he for the front turn signals. I will check further as this should have been an easy find.
Reply With Quote
  #6  
Old 01-22-2023, 11:39 AM
Bigboresrule Bigboresrule is offline
Member
 
Join Date: Feb 2021
Location: Pecatonica, Illinois
Posts: 6
Default

Yes page 16 does clearly show the wires. Appears I had 2 pdf files for rieju and one was one page 21 but not very defined (I may delete this pdf and keep the other one) the issue is finding the wires. I will did into this today with the page 16 wiring and color code.
Reply With Quote
  #7  
Old 03-18-2023, 04:40 PM
Bigboresrule Bigboresrule is offline
Member
 
Join Date: Feb 2021
Location: Pecatonica, Illinois
Posts: 6
Smile

Found the gray and green/yellow horn wires hidden tucked in with large wiring bundle near the head stay. All hooked up now with decent horn.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2011 vs Ranger singletracker General Discussions & Announcements 27 09-18-2023 01:14 PM
Ranger/Rieju rear disc guard schlitzy Enduro Chassis & Body 10 12-03-2021 02:51 PM
Ranger Ec300 Jetting Westy Enduro Intake/Carburetion - 2 stroke 8 04-05-2021 03:42 AM
Rieju Introduces Ranger Model 200-300 Moto7man General Discussions & Announcements 0 01-15-2021 12:15 PM
GasGas EC Ranger... Davehuge General Discussions & Announcements 32 01-03-2020 02:41 AM




All times are GMT -5. The time now is 11:26 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org