GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-12-2018, 03:59 PM
nhgas's Avatar
nhgas nhgas is offline
Silver Level Site Supporter
 
Join Date: Jun 2011
Location: New Hampshire
Posts: 25
Default 2018 EC License Plate Attachment?

How did you attached the license plate on a 2018?
Apparently I did it wrong! Somewhere on Sundays 100 mile ride, it broke, so there is 3/4 of license plate somewhere in New Hampshire or Vermont.


Reply With Quote


  #2  
Old 09-12-2018, 04:21 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,488
Default

What are your license plates made from? Did you mount it on the lower plastic part or did you remove it back and mount it up high?
Reply With Quote
  #3  
Old 09-12-2018, 04:21 PM
Wimpy525 Wimpy525 is online now
Senior Member
 
Join Date: Oct 2011
Location: Catawissa Pa
Posts: 333
Default

Get one of these and attach just below the tail light.https://enduroeng.com/index.php?rout...ory&path=30_31 I have one on my 13 and will be putting one on the new GP
Reply With Quote
  #4  
Old 09-12-2018, 04:23 PM
Wimpy525 Wimpy525 is online now
Senior Member
 
Join Date: Oct 2011
Location: Catawissa Pa
Posts: 333
Default

Quote:
Originally Posted by Jakobi View Post
What are your license plates made from? Did you mount it on the lower plastic part or did you remove it back and mount it up high?
US models do not come with any brackets for a plate.
Reply With Quote
  #5  
Old 09-13-2018, 05:42 AM
Danj56's Avatar
Danj56 Danj56 is online now
Bronze Level Site Supporter
 
Join Date: Jul 2012
Posts: 189
Default

Copy the plate, shrink it down to 80% and laminate it. I haven't lost one since. I guess you must have lost it at the Ammo.
Reply With Quote
  #6  
Old 09-13-2018, 09:33 AM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 3,971
Default

Quote:
Originally Posted by Danj56 View Post
Copy the plate, shrink it down to 80% and laminate it.
And, attach to your tool bag.
Reply With Quote
  #7  
Old 09-14-2018, 11:18 AM
nhgas's Avatar
nhgas nhgas is offline
Silver Level Site Supporter
 
Join Date: Jun 2011
Location: New Hampshire
Posts: 25
Default

Quote:
Originally Posted by Jakobi View Post
What are your license plates made from? Did you mount it on the lower plastic part or did you remove it back and mount it up high?
Our plates are cheap stamped metal. I only mounted with two bolt sideways. I guess the vibrations where to much for the plate.
Attached Images
File Type: jpg plate.jpg (33.4 KB, 4 views)
Reply With Quote
  #8  
Old 09-14-2018, 11:19 AM
nhgas's Avatar
nhgas nhgas is offline
Silver Level Site Supporter
 
Join Date: Jun 2011
Location: New Hampshire
Posts: 25
Default

Quote:
Originally Posted by Danj56 View Post
Copy the plate, shrink it down to 80% and laminate it. I haven't lost one since. I guess you must have lost it at the Ammo.
Yes, Sunday's ride... did not see you there. Did you go?
Reply With Quote
  #9  
Old 09-14-2018, 12:18 PM
Danj56's Avatar
Danj56 Danj56 is online now
Bronze Level Site Supporter
 
Join Date: Jul 2012
Posts: 189
Default

Yeah we ride Saturday and Sunday. Saw you with Rick, you were pulling into both gas stops as we were leaving. Started riding Saturday at 61 and ended up being 62 by the time we finished on Sunday
Reply With Quote
  #10  
Old 09-14-2018, 06:10 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,488
Default

Quote:
Originally Posted by nhgas View Post
Our plates are cheap stamped metal. I only mounted with two bolt sideways. I guess the vibrations where to much for the plate.
Ours are the same!
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gas Gas Motos License Plate & Frames Rod Overstreet Enduro Product Announcements 0 08-10-2015 08:00 AM
Gas Gas logo stickers/license plate frames motorhead General Discussions & Announcements 6 12-05-2011 05:09 PM
Plating (license, not chrome) Thread twowheels Suggestion Box 5 09-06-2010 03:43 PM
License Plate in Washington HydroDog Western United States 13 10-12-2007 09:25 PM




All times are GMT -5. The time now is 09:44 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org