GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-17-2018, 06:06 PM
Wypipo Wypipo is offline
Member
 
Join Date: Sep 2018
Posts: 49
Default 18 XC300 jetting for 5000 feet

I?m very new to jetting. Looking for info on jetting for 3000-6000 feet with most riding being at 4 to 5000. Everyone seems to boast about a JD kit on other bikes. Would this be a good route to go?


Reply With Quote


  #2  
Old 09-17-2018, 10:36 PM
AZRickD AZRickD is offline
Senior Member
 
Join Date: Feb 2007
Posts: 1,823
Default

Definitely replace the stock needle for one that is leaner.

There are a few threads on the forum that discusses the 2018 jetting solutions.
Reply With Quote
  #3  
Old 09-18-2018, 12:27 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,569
Default

Nothing wrong with forking out for a JD kit, if you're happy to go near enough is good enough and see a significant improvement over stock.

In saying that, the threads mentioned above will offer you solutions that give you a much finer range to tune down to, for a fraction of the cost.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stock Jetting in 2018 XC300 AZRickD Enduro Intake/Carburetion - 2 stroke 0 09-02-2018 05:48 PM
2011 EC 300 jetting for 5000-7500ft?? fire1998 Enduro Intake/Carburetion - 2 stroke 9 08-29-2011 08:08 PM
Jetting for 2011 xc300 jeffs2200 Enduro Intake/Carburetion - 2 stroke 18 04-08-2011 04:09 AM
5000-7000 ft. above sea level (jetting) Link Enduro Intake/Carburetion - 2 stroke 7 03-25-2008 01:45 PM
05 EC300 jetting for 4-5000 ft dhally Enduro Intake/Carburetion - 2 stroke 1 07-05-2007 06:04 PM




All times are GMT -5. The time now is 02:29 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org