GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 02-23-2012, 04:08 PM
Vinny's Avatar
Vinny Vinny is offline
Senior Member
 
Join Date: Dec 2010
Location: Austin, Tx
Posts: 110
Default Eldor coil . Why two different ones ?

I need a coil for my 450. Pulled the old one off. The # is MFS400380006

I wonder why I dont have a 450 coil.


__________________
Vinny
Austin , Tx
A wonderfully working and hard riding '05 GG 450.
Reply With Quote


  #2  
Old 02-24-2012, 04:30 AM
Vinny's Avatar
Vinny Vinny is offline
Senior Member
 
Join Date: Dec 2010
Location: Austin, Tx
Posts: 110
Default

If anyone knows of a coil for a 450 for sale please PM me, I would like to buy it. Thanks.
__________________
Vinny
Austin , Tx
A wonderfully working and hard riding '05 GG 450.
Reply With Quote
  #3  
Old 02-23-2015, 11:29 AM
Edm11 Edm11 is online now
Member
 
Join Date: Jan 2014
Posts: 83
Default

Not sure if my pm's are working. I know this is an old thread, but if you still have that coil for sale I need to buy it. Part # mfs400380006

Thanks
Reply With Quote
  #4  
Old 02-25-2015, 12:00 AM
Edm11 Edm11 is online now
Member
 
Join Date: Jan 2014
Posts: 83
Default

Found... Thanks Vinny !
Reply With Quote
  #5  
Old 03-02-2015, 02:26 PM
Edm11 Edm11 is online now
Member
 
Join Date: Jan 2014
Posts: 83
Default

Was wrong part, I need MFS450780006 if anyone has one, thanks.
Reply With Quote
  #6  
Old 07-09-2015, 06:30 AM
gazgaz gazgaz is offline
Member
 
Join Date: Jul 2015
Posts: 3
Default

Hey guys,

I've been scouring the internet for solutions to a no spark problem on an 05 fse 450, and I've tried a bunch of different things. Everything seems to be perfect, other than the fact I'm not getting a secondary resistance reading through the coil. One fella I called said this is normal, but everything else I've read says otherwise?

I'm hoping to buy one, but was hoping you guys might be able to shed some light on the matter first.

Thanks!
Reply With Quote
  #7  
Old 07-10-2015, 05:03 PM
Vinny's Avatar
Vinny Vinny is offline
Senior Member
 
Join Date: Dec 2010
Location: Austin, Tx
Posts: 110
Default

Quote:
Originally Posted by gazgaz View Post
Hey guys,

I've been scouring the internet for solutions to a no spark problem on an 05 fse 450, and I've tried a bunch of different things. Everything seems to be perfect, other than the fact I'm not getting a secondary resistance reading through the coil. One fella I called said this is normal, but everything else I've read says otherwise?

I'm hoping to buy one, but was hoping you guys might be able to shed some light on the matter first.

Thanks!
PM with suggestions sent.
__________________
Vinny
Austin , Tx
A wonderfully working and hard riding '05 GG 450.
Reply With Quote
  #8  
Old 07-29-2015, 09:14 AM
Tafka Tafka is offline
Senior Member
 
Join Date: Feb 2015
Location: Estonia
Posts: 113
Default

Has anyone tried to replace the FSE450 ignition coil with VAG group(VW/Audi/Skoda) ignition coil? By the appearance they are the same and the plug should be the same. If anyone has one coil to measure, then share the results....length etc.
Example:
Reply With Quote
  #9  
Old 09-01-2016, 04:38 AM
Tafka Tafka is offline
Senior Member
 
Join Date: Feb 2015
Location: Estonia
Posts: 113
Default

Okay i went on a limb and bought one VAG group ignition coil (part 036905715), as on above picture. Measurments are all the same, plug fits but the wire order is little bit different. So reorderd the pins but still no spark
Are the inside electronics really this different that you can't get a spark? Or is it possible i got defective coil from shop?
It's crazy how GasGas wants 150-200 euros for original coil and car coils cost 20-30 euros :S

Last edited by Tafka; 09-01-2016 at 08:22 AM.
Reply With Quote
  #10  
Old 09-05-2016, 08:39 AM
Tafka Tafka is offline
Senior Member
 
Join Date: Feb 2015
Location: Estonia
Posts: 113
Default

Would MFS450780006 ignition coil work on older models?
MFS450780006 is for 2007 and up models so it would be for Kokusan ECU.
But it has built in igniter like older one. It has 3 pins vs 4pins but usually 4 pin ones have 2 grounds.
So i'm wondering if Kokusan and Magneti Marelli ECU-s have the same triggering signal? I think Marelli has 12v trigger signal for ignition?
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
testing lighting coil bonkeye Enduro Electrical & Wiring 7 05-09-2012 08:51 PM
FSE Coil-on-plug ohm readouts? bergerhag Enduro Engine 4 stroke (including EFI & Exhaust) 1 10-20-2008 04:05 AM
Coil? bronco-hunter Enduro Electrical & Wiring 0 07-28-2008 07:48 PM




All times are GMT -5. The time now is 12:18 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org