Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Product Announcements

Enduro Product Announcements Announce new gasgas enduro products here - Vendors Welcome...


Reply
 
Thread Tools Display Modes
  #1  
Old 01-03-2011, 05:28 PM
Keg Keg is offline
Senior Member
 
Join Date: Aug 2006
Posts: 304
Default 20mm thread (04-early 06) front axle nut conversion

Due to many requests we have started to make a front Hex Head axle nut again to suit the 2004 - early 2006 bikes (20mm threaded axle). If you are not familiar with this, it converts your allen key front nut to a 'Yamaha style' 22mm hex nut. This means you can carry a Yamaha 22/27 spanner to take your wheels out and throw away your allen key.

http://www.mainjet.com.au/product_in...5658ed0731590e

Also see the spanner & nut kit available. http://www.mainjet.com.au/product_in...roducts_id=290

We also stock the later model kit to suit late 2006 - to current years with a 22mm threaded axle.


__________________
EC300 2019 (11 Gassers owned, many more to go)
Reply With Quote


  #2  
Old 01-04-2011, 11:02 PM
moto9's Avatar
moto9 moto9 is offline
Silver Level Site Supporter
 
Join Date: Mar 2009
Location: Hawaii
Posts: 367
Default

Quote:
Originally Posted by Keg View Post
Due to many requests we have started to make a front Hex Head axle nut again to suit the 2004 - early 2006 bikes (20mm threaded axle). If you are not familiar with this, it converts your allen key front nut to a 'Yamaha style' 22mm hex nut. This means you can carry a Yamaha 22/27 spanner to take your wheels out and throw away your allen key.

http://www.mainjet.com.au/product_in...5658ed0731590e

Also see the spanner & nut kit available. http://www.mainjet.com.au/product_in...roducts_id=290

We also stock the later model kit to suit late 2006 - to current years with a 22mm threaded axle.
Nice...can you figure shipping to Hawaii...I might take 3 of them, PM me
TKS
Reply With Quote
  #3  
Old 01-04-2011, 11:05 PM
wence's Avatar
wence wence is offline
Bronze Level Site Supporter
 
Join Date: Nov 2008
Location: Adelaide South Australia
Posts: 1,159
Default

I have these on my bike, great setup. good with the spanner also as it does the plug and front and rear axle.
I also grabbed th eaxle puller for the front.
Cheers Mark.
Reply With Quote
  #4  
Old 01-04-2011, 11:26 PM
Brian's Avatar
Brian Brian is offline
Senior Member
 
Join Date: Aug 2009
Location: Los Gatos, CA
Posts: 306
Default

Any way I can tell which nut I need with out pulling the axle out and measuring?

I have an 06 with zokes forks.
__________________
2006 Gas Gas EC250
2011 Husaberg FE390
Reply With Quote
  #5  
Old 01-05-2011, 01:01 AM
wence's Avatar
wence wence is offline
Bronze Level Site Supporter
 
Join Date: Nov 2008
Location: Adelaide South Australia
Posts: 1,159
Default

If I were you Brian, I would PM Keg, He will know what to supply you.
He is not too bad a bloke either.
Cheers Mark
Reply With Quote
  #6  
Old 01-05-2011, 04:11 AM
Keg Keg is offline
Senior Member
 
Join Date: Aug 2006
Posts: 304
Default

Thanks Wence,

Check freight here: http://auspost.com.au/index.html

It would be $10 or $15 for all internationally deliveries for small stuff. I think our web site tells you it is $20 automatically, but I manually charge it so I try to make it reasonable.

Brian, just take the axle nut out and measure the thread. It should be about 20mm or 22mm.
__________________
EC300 2019 (11 Gassers owned, many more to go)
Reply With Quote
  #7  
Old 04-13-2013, 07:16 PM
Brian's Avatar
Brian Brian is offline
Senior Member
 
Join Date: Aug 2009
Location: Los Gatos, CA
Posts: 306
Default

Last ride my front axle nut decided to disappear :/

Tried to order from the website and it is saying "No shipping available to the selected country". Is it true?

I'd really like to use a socket instead of an allen key on my front axle.
__________________
2006 Gas Gas EC250
2011 Husaberg FE390
Reply With Quote
  #8  
Old 04-14-2013, 06:33 AM
GasGas's Avatar
GasGas GasGas is offline
Senior Member
 
Join Date: Aug 2007
Location: Nova Scotia, Canada
Posts: 694
Default

Quote:
Originally Posted by Brian View Post
Last ride my front axle nut decided to disappear :/

Tried to order from the website and it is saying "No shipping available to the selected country". Is it true?

I'd really like to use a socket instead of an allen key on my front axle.
I got the same message. I would like to purchase the shift lever.
__________________
2018 EC 300
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Front Axle noobi Enduro Chassis & Body 10 09-21-2009 09:51 PM
new front axle on the 07/08's REVERUP Enduro Chassis & Body 10 04-06-2008 11:41 AM




All times are GMT -5. The time now is 09:01 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org