Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 06-30-2011, 04:38 PM
blanc blanc is offline
Senior Member
 
Join Date: Oct 2010
Posts: 178
Default GasGas engine maintenance schedule...

Hi

At what hours do GasGas suggest to rebuild your engine? Presume different hours for rings and full top end .


Reply With Quote


  #2  
Old 06-30-2011, 07:13 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Depends on how you ride, if you dust your engine, drown your bike etc etc etc..

Some people swear by doing the piston and rings as a package every 60-70hrs. Others will do a set of rings around 50hrs, and then a full piston at 100hrs. There are pleanty who do 100hrs on a set of rings.

I pulled down my 2010 at 65hrs for a fresh piston and rings. Below are pictures of what I found.







Make what you want of it.
Reply With Quote
  #3  
Old 06-30-2011, 07:14 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

I don't even bother with rings. I do a full top end between 75-100 hrs mixed riding and racing on a 250, B level. Whenever I do mine the rings are well withen spec. Piston looks good too, its just the fatigue factor to consider. I know 300s that have gone years without being opened up. Just do compression checks, keep the filter clean, good oil in both mix and trans.
Reply With Quote
  #4  
Old 07-01-2011, 06:58 AM
blanc blanc is offline
Senior Member
 
Join Date: Oct 2010
Posts: 178
Default

Mines a 200. Thought i should do rings at 25 and top at 50. Will do a full top at 50 plus to be safe. What about powervalve cleaning? When should that be done ?
Reply With Quote
  #5  
Old 07-02-2011, 08:32 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

Do it all at the same time, as long as you run good oil.
Reply With Quote
  #6  
Old 07-03-2011, 12:42 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Quote:
Originally Posted by GMP View Post
Do it all at the same time, as long as you run good oil.
Yep! Its easier to do as one job as you have everything stripped down to where it has to be anyway.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2011 National Enduro schedule gasgasman Off Road Racer's Corner 3 10-14-2010 10:43 AM
Valve maintenance 450 engine speeddemon Enduro Engine 4 stroke (including EFI & Exhaust) 5 02-17-2010 01:32 AM
2010 NEPG Schedule gasgasman Off Road Racer's Corner 4 10-30-2009 10:23 AM
AMA National Enduro '09 schedule gasgasman Off Road Racer's Corner 11 02-03-2009 12:06 PM
2007 WEC Schedule Berkyboy General Discussions & Announcements 0 08-18-2006 11:24 AM




All times are GMT -5. The time now is 12:31 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org