Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #11  
Old 07-12-2014, 03:30 AM
Caravan Monster's Avatar
Caravan Monster Caravan Monster is offline
Senior Member
 
Join Date: Jun 2010
Location: Northamptonshire, England
Posts: 315
Default

I'm running an '06 EC200. I use it for riding in sportsman / novice class and occasional greenlaning. Going to the single base gasket made a big change to how the bike runs, although I would echo Jakobi's advice about getting the tolerances and port timing right if you would like a 100% job. Just doing the base gasket was good enough for my purposes, although I might go to town on it one day. Fuel efficiency is about 80 miles to a tank and power delivery is spot-on for me, plenty there when you need it and doesn't punish small throttle control errors like the EC300 did.

The UK EC200 nearly always have 2k3 (believe other regions get the 2k2), so already have the bigger flywheel. I wouldn't personally bother with the powervalve cover, just freshen up the engine, build it up with one base gasket and go from there.


__________________
'00 Montesa Cota 315R
'13 Husaberg TE 300
Reply With Quote


  #12  
Old 07-12-2014, 04:30 AM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

Proper jetting is the fisrt stop.

If you are going to mess around with gaskets, just get the bloody head done, it's cheap, any body with a lathe can do it, just make sure you adjust the compression ratio too. There are numerous posts telling you how to do this, or if you really need, ask me and I'll make a guide.
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
50/50 tire suggestions? Why Z? Enduro Chassis & Body 3 05-22-2014 07:20 PM
Needle suggestions? siaknijustin Enduro Intake/Carburetion - 2 stroke 5 10-27-2012 08:19 PM
Spring rate suggestions please wasp4banger Enduro Suspension 7 08-23-2012 11:26 AM
need a new air filter any suggestions.... dareuk Enduro Product Reviews 4 03-24-2010 04:05 PM
Suggestions on removing swingarm roostafish General Discussions & Announcements 12 10-04-2009 11:11 PM




All times are GMT -5. The time now is 08:07 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org