|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ec300 2011 lowering kit
Hi, I'm trying to find a lowering kit for my bike but none seams to have one. GasGas had it on their site but no longer stock it. Any ideas. I'm in the uk
|
#2
|
||||
|
||||
Your best bet is to have a suspension tuner lower your suspension rather than the links. I used the links for a year and then had it done correctly.
__________________
2004 GasGas DE250 |
#3
|
|||
|
|||
Was hoping for a cheap fix as I only do green lanes
|
#4
|
||||
|
||||
The 2011 chasis is by no means a tall bike to start with, and also responds well to running quite a bit of sag 110-120mm.
My suggestion would be simply to just ride the bike, but if thats not an option, then I'm with above. Save your dollars and have the shock shortened internally. It'll likely be less than a lowering link anyway. |
#5
|
||||
|
||||
Lowering dog bones
They sell the 124mm dog bones at check point off-road that will lower your bike about 3/4 to 1 inch I am 5'8" and I can sit flat footed check them out
|
#6
|
|||
|
|||
Thanks guys and I'll check out the dog bones
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
lowering 2004 ec 300 | houndog | Enduro Suspension | 23 | 05-15-2014 10:17 PM |
2011 EC250 graphics fit 2011 EC300? | Jarvo_325 | Enduro Chassis & Body | 2 | 11-25-2012 06:28 PM |
Un-lowering help/ question? | rgranger | Enduro Suspension | 1 | 05-28-2012 09:03 PM |
lowering link on the 07 | jhendr3702 | Enduro Suspension | 14 | 08-06-2011 11:06 AM |
lowering links | d251man | Enduro Chassis & Body | 2 | 09-30-2006 08:21 AM |