|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
embarrassing question
Well I feel like an idiot but I cant work out how to take my air filter off. Last buke had a simple wingnut to undo but I cant figure out the whole.spring and metal thing? So how does it work?
|
#2
|
||||
|
||||
with your hand at the back of the rod simply push the alumn. rod w/ spring towards the front of the bike. this allows the rod to be removed from the rear fender. very simple.
|
#3
|
|||
|
|||
Pull toward your air filter, the metal will extend into the air filter cage enough to release from the rear fender area.
Great simple design.
__________________
2014 Sherco SEF 300-R 2014 Sherco ST 300 2013 Sherco X-ride |
#4
|
|||
|
|||
Brilliant. Thank you very much!
|
#5
|
||||
|
||||
Next trick is getting the filter cage back in so it isn't hanging up. Do a search.
|
#6
|
|||
|
|||
your not the first guy that has been stumped by the funky filter holders! as they say a silly question is way better than a silly mistake.
|
|
|