Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 09-28-2015, 07:15 PM
Harry's Avatar
Harry Harry is offline
Senior Member
 
Join Date: Nov 2006
Posts: 304
Default Compression ratio and Squish FYI

Hi to All,

I came across this on the on http://www.polini.com/en/page_417.html Its a good write up on
Compression ratio and Squish.

Harry



Last edited by Harry; 09-28-2015 at 07:22 PM. Reason: correct link
Reply With Quote


Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
squish, compression ratio, and a few questions... rbreak Enduro Engine - 2 stroke 25 02-20-2014 06:35 PM
What oil and what ratio ec 300 eviljim Enduro Engine - 2 stroke 5 07-10-2012 01:03 PM
Compression ratio ? Brian VT Enduro Engine - 2 stroke 10 02-03-2011 10:47 PM
what ratio to premix at? j@y Enduro Engine - 2 stroke 16 05-18-2007 09:53 AM
Pre-Mix ratio gasIdaho Enduro Intake/Carburetion - 2 stroke 8 03-21-2007 11:17 AM




All times are GMT -5. The time now is 12:54 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org