Expansion Chamber Springs

[ddab]

Does anyone know the specs for the motor to pipe springs? Or possibly an interchange with another brand? Need springs by tomorrow A.M and nearest GG dealer is Minnesota or Illinois. My local Asian shops are unable to match parts without a specific bike to look up.

Any ideas?

Thanks in advance.

[nambo-trev]

The standard fmf springs for all the gg pipes work fine for me, there just springs they don't need to be bike specific there just holding tension on the pipe to the spigot

[Stoby]

I believe early -mid 90s ktms work if you can use that as a cross I think either 60-63mm is the length you need/ will work . I believe the newer ktm are too short
Not positive though
Stoby

[ddab]

Thanks guys. While I would love to use the BE25610042 I will need to visit our local dealer to source a spring. The KTM lead should help tons. I'll be getting the proper one from Mark at GoFasters in the near future. But I have to leave the house in the early AM to ride. Need to replace the newly broken spring today.
I am off to the pumpkin shack.
Thanks again!!