Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-20-2008, 10:48 AM
steve steve is offline
Senior Member
 
Join Date: Jan 2008
Posts: 114
Default assembly

2 questions, 1] Do you apply assembly lube on the wrist pin rod bearing and or any other area?2] How much lube,pre-mix I assume,is the proper amount for top-end assembly? I have done this before,but for the sake of sounding stupid I've never asked.Any input would be great.Thanks in advance!!!


Reply With Quote


  #2  
Old 02-20-2008, 06:55 PM
Nick's Avatar
Nick Nick is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Nevada
Posts: 560
Default

There as many ways of doing this as there is oil stories. Personally i just use a very small amount of oil to make the parts slide together easier.
__________________
Dont follow me, You wont make it.
Reply With Quote
  #3  
Old 02-20-2008, 08:08 PM
kim kim is offline
Senior Member
 
Join Date: Jul 2006
Location: Sunny Hawkes Bay, New Zealand
Posts: 189
Default

I just lube everything inside the motor with the premix oil you normally mix with your gas.
That way you know it will burn off and/or mix properly and not leave a film of something unwanted.
Worked so far for me.

K
__________________
08 TXT 300
06 Gasgas EC200
03 Gasgas EC300
05 Pampera 250
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moto tas reed assembly Knobbiethrower Enduro Engine - 2 stroke 3 09-23-2008 02:56 AM




All times are GMT -5. The time now is 12:52 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org