|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
200 06 stock jetting???
looked at the chart on here and no 200....i have two friends who just have bought used 200,s ...and are intrested in a starting point.,. needle size and jets installed on factory 200 with boyseen valve ..fmf pipe combo..???
__________________
"The empty can rattles the most"(James Hetfield). |
#2
|
||||
|
||||
please someone reply
the manuals are no help on the 200...does anyone around 1000 to 1500 ft know there stk 200 jetting and needle..
__________________
"The empty can rattles the most"(James Hetfield). |
#3
|
||||
|
||||
I would say a 45 pilot, 185Main and needle in mid position should be a good starting point. Look in the 2 stroke jetting section.
__________________
2002 Gasgas EC250 (gone not forgotten) 2012 Ktm 300xc 2001 Gasgas EC300 Lifes journey is not to arrive safely at the grave in a well preserved body, But rather to skid in sideways totally worn out shouting holy cow what a ride !!!! |
#4
|
||||
|
||||
This is all we got in the STICKY for a 200
Bike year & model = 2003 EC200 Temperature (degF) = 68 - 100 Elevation (feet) = 1300 – 2500 ( roughly varying ) Main jet = 178 Pilot jet = 48 Needle & notch = N3HJ - 2 Air screw setting = 2 3/4 Throttle valve/slide = 5
__________________
2002 Gasgas EC250 (gone not forgotten) 2012 Ktm 300xc 2001 Gasgas EC300 Lifes journey is not to arrive safely at the grave in a well preserved body, But rather to skid in sideways totally worn out shouting holy cow what a ride !!!! |
#5
|
||||
|
||||
You just might try looking in the 2stroke jetting / carb thread.....
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#6
|
||||
|
||||
That was the only 200 from the thread sticky.
__________________
2002 Gasgas EC250 (gone not forgotten) 2012 Ktm 300xc 2001 Gasgas EC300 Lifes journey is not to arrive safely at the grave in a well preserved body, But rather to skid in sideways totally worn out shouting holy cow what a ride !!!! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
where to go from here. jetting q. | dank | Enduro Intake/Carburetion - 2 stroke | 105 | 04-11-2011 04:25 PM |
05 ec 300 stock jetting | randy | Enduro Intake/Carburetion - 2 stroke | 15 | 09-08-2010 06:53 PM |
04 ec 300 Jetting | lordfeyr | Enduro Intake/Carburetion - 2 stroke | 12 | 01-26-2010 03:16 AM |
jetting | macho comacho | Enduro Intake/Carburetion - 2 stroke | 21 | 03-10-2009 03:11 AM |
02 ec 250 jetting help | crem55 | Enduro Intake/Carburetion - 2 stroke | 9 | 07-12-2007 01:44 PM |