|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
What Reeds question=help
I did a search but didn't come up with the answer, so figure to ask you all.
Does anyone know what reeds will fit a 2000 GG250? It has Boysen on the tag of read holder, it looks like the stock setup, same that is on my 03GG200. Need to order asap, help Thanks
__________________
13 Suz RMZ-250 03 GasGas EC200 1993 RM 250 |
#2
|
||||
|
||||
Quote:
Theres a few cross overs thrown around, I never did find out about a reed petal with 2 screw holes per reed. I ended up using a Boyeson PSR-21, which I believe is from a 96 YZ250, which has 3 screw holes per reed http://www.gasgasrider.org/forum/showthread.php?t=12762 |
#3
|
||||
|
||||
Its the old OEM Boyeseen RAD valve, used on pre '05 bikes. You can get these directly from Boyeseen if need be. There used to be both Carbon Fiber and Fiberglass options. Should be same as a Honda CR250 RAD valve if no GG app listed.
|
#4
|
||||
|
||||
Okay, thanks guys...I have the 3 hole. Ordered the YZ 1990-96 Boysen power reeds.
Plan on racing the 00 this weekend and still chasing a mid range bog. Thnaks again
__________________
13 Suz RMZ-250 03 GasGas EC200 1993 RM 250 |
#5
|
||||
|
||||
That IS NOT what you need. Reeds for a RAD valve are a lot different.
|
#6
|
||||
|
||||
It's not the Rad valve, it's Boyesen. Well, it was for my 2002 and all of the others in that year range. If you have four reeds it's the Rad valve, if you have two reeds it's the Boyesen PSR-21.
http://www.gasgasrider.org/forum/sho...2&postcount=14
__________________
Phil (New bike pending...) |
#7
|
|||
|
|||
I have a spare set still in packaging for my '00, Boyesen part number is RL-02, should say the 2nd set, one of which I am currently using. This is the "power reed" if that makes a difference. Not carbon fiber. And they're identical to the original ones that I replaced.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) Last edited by jostby; 09-18-2012 at 09:53 PM. Reason: added picture |
#8
|
||||
|
||||
So what are you guys saying, that you have a different reed block that takes YZ reeds? The only OEM reed blocks I've seen on GGs were Boyeseen RAD valves through '04, and MT VForce 3s '05 to present. The bolt pattern in the cases is same as a Honda CR250.
|
#9
|
||||
|
||||
Contact Boyesen directly. They have them in stock.
__________________
2004 GasGas DE250 |
#10
|
||||
|
||||
Yep. '96 YZ250 reeds, PSR-21 for my reed block, or RL-02 as pictured as an alternate. And yes, Boyesen has them in stock, unless you find some on ebay for a ridiculously low price. An my package had three reeds instead of two, I think that Boyesen wasn't paying attention to that particular package.
__________________
Phil (New bike pending...) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Reeds? | boyscout | Enduro Intake/Carburetion - 2 stroke | 7 | 12-18-2011 01:04 PM |
ec 300 reeds | glassman581 | United Kingdom | 3 | 03-23-2011 08:15 PM |
Reeds | Gasgasogeros | Enduro Intake/Carburetion - 2 stroke | 5 | 12-15-2009 07:13 AM |
V Force 3 Reeds Question | gasIdaho | Enduro Engine - 2 stroke | 11 | 09-02-2007 12:02 PM |
Reeds? | gasgasman | Enduro Intake/Carburetion - 2 stroke | 7 | 08-15-2006 05:40 AM |