Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion


Reply
 
Thread Tools Display Modes
  #1  
Old 07-11-2017, 09:42 AM
Finnyfire Finnyfire is offline
Member
 
Join Date: Mar 2016
Posts: 11
Default 2010 ec450 throttle position sensor settings?

Please help. My bike has been at the shop for a month. They have been waiting to hear back from gasgas on he settings for the throttle position sensor. Does anybody here know what the correc settings would be or how I could find them? I'm desperate. Thanks.


Reply With Quote


  #2  
Old 07-24-2017, 06:25 PM
Finnyfire Finnyfire is offline
Member
 
Join Date: Mar 2016
Posts: 11
Default

The issue is there is a dead spot right as you open up the throttle. If you throttle up real fast the bike acts like it wants to die. However if you roll slowly on the throttle it runs fine. Could this be an injector issue? I'm lost. The shop thought it was the throttle position sensor but could not diagnose it without the computer or specs. Any help.
Reply With Quote
  #3  
Old 07-25-2017, 05:58 AM
Tafka Tafka is offline
Senior Member
 
Join Date: Feb 2015
Location: Estonia
Posts: 121
Default

How's your idle? Maybe too low? Some fuel injected bikes like a little bit higer idle revs.
Reply With Quote
  #4  
Old 07-25-2017, 07:12 AM
Finnyfire Finnyfire is offline
Member
 
Join Date: Mar 2016
Posts: 11
Default

It might be to low actually. Any idea how I change the idle on a fuel injected bike?
Reply With Quote
  #5  
Old 07-25-2017, 08:35 AM
Tafka Tafka is offline
Senior Member
 
Join Date: Feb 2015
Location: Estonia
Posts: 121
Default

The little hex/allan key screw on the throttle body, see the PDF on page 2.
2010 maybe a little bit different but you should still find it:
PDF HERE

I know a friend of mine who had FSR 515 and the little screw had come loose somehow, dropping the idle revs too low and hea had also trouble stalling etc.
Reply With Quote
  #6  
Old 07-25-2017, 08:43 AM
Finnyfire Finnyfire is offline
Member
 
Join Date: Mar 2016
Posts: 11
Default

Excellent. I'll give it a go and reply with back with results as soon as I get it done. Might be a day or two. Thanks for the help.
Reply With Quote
  #7  
Old 07-27-2017, 04:33 PM
Finnyfire Finnyfire is offline
Member
 
Join Date: Mar 2016
Posts: 11
Default

Ok, adjusting the idle seemed to help some. It still has a small bog if I open up the throttle quickly bet then revs up accordingly. At least it no longer dies when opening up the throttle quickly. Does anybody know if that big is normal delay for the throttle? I'm going to clean the injector next.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2010 gas gas ec450...$5,000 k_osborne Used Bikes 1 04-17-2013 10:51 PM
Steering Dampener for 2010 EC450 ECRider Enduro Engine 4 stroke (including EFI & Exhaust) 4 02-12-2011 01:03 AM
2005 450FSE vs 2010 EC450 fkmf6 General Discussions & Announcements 8 07-27-2010 11:34 PM
2010 ec450 any feedback fkmf6 General Discussions & Announcements 6 05-15-2010 09:50 AM
Throttle position sensor adjustment? bergerhag Enduro Engine 4 stroke (including EFI & Exhaust) 3 05-08-2008 06:46 AM




All times are GMT -5. The time now is 03:08 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org