GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Trials Technical Forums > Trials Engine

Trials Engine Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools Display Modes
Old 05-01-2020, 11:31 AM
sc-em sc-em is offline
Join Date: Jul 2015
Posts: 3
Default 280 TXT Clutch drag

Hi all,
Not been on for a while, but I though while I have time on my hands with these current circumstances I would get the TXT ride worthy again. I have sent off for some brake master cylinder seals to hopefully sort the front brake, but noticed I couldn't disengage the clutch. Now I know about the putting it in gear, rocking etc but it still wont budge. I do run it on the correct oil, but remember reading an article about a brass bush that can get tight and need relieving which can help. The problem is I can't find any diagrams that show me which bit. I have never really taken off any main parts of the engine housing and don't want to make any mistakes. Any photos or links would be gratefully received. It is a 2001 non Pro model.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Yes my Clutch does drag. (F5) Enduro Engine - 2 stroke 42 04-09-2019 12:11 AM
Clutch drag.... BluegassXCR Enduro Engine - 2 stroke 3 07-04-2011 03:27 PM
fixing clutch drag when hot. stainlesscycle Enduro Engine - 2 stroke 25 03-12-2011 03:36 AM
Does your clutch drag? stay_upright Enduro Engine - 2 stroke 11 06-05-2008 03:14 AM
Clutch Drag? Gas Huffer Enduro Engine - 2 stroke 5 12-11-2007 05:02 AM

All times are GMT -5. The time now is 03:40 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 -