GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-29-2012, 07:12 PM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 957
Cool E-start=200

Can anyone please tell me if retro-fit e-start will work on a 2012 200???


Reply With Quote


  #2  
Old 11-29-2012, 08:12 PM
twowheels's Avatar
twowheels twowheels is offline
Senior Member
 
Join Date: Oct 2009
Location: Dearborn MI
Posts: 1,860
Default

Quote:
Originally Posted by john r b View Post
Can anyone please tell me if retro-fit e-start will work on a 2012 200???
Sure it will, and a lot easier than in years prior. All of the 2012+ subframes are set up for e-start/battery installation.

You'll need the starter motor and gears, the pv cover with the starter motor mount, the ignition cover, the driven gear, a starter button, the harness, battery leads, relays, and a battery of course. If I missed something somebody help out.
__________________
Steven Beane #275
PlusOnePerformance - Superior Service the World Over - Dearborn MI
AMA District 14 (Michigan) Officer

afterhourscycle.com
Michigan's Beta and TM Race Headquarters
Reply With Quote
  #3  
Old 11-29-2012, 08:47 PM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

Quote:
Originally Posted by twowheels View Post
Sure it will, and a lot easier than in years prior. All of the 2012+ subframes are set up for e-start/battery installation.

You'll need the starter motor and gears, the pv cover with the starter motor mount, the ignition cover, the driven gear, a starter button, the harness, battery leads, relays, and a battery of course. If I missed something somebody help out.
And what is the cost of this retro-fit?
Reply With Quote
  #4  
Old 11-29-2012, 11:30 PM
twowheels's Avatar
twowheels twowheels is offline
Senior Member
 
Join Date: Oct 2009
Location: Dearborn MI
Posts: 1,860
Default

For you, special price

PlusOnePerformance
__________________
Steven Beane #275
PlusOnePerformance - Superior Service the World Over - Dearborn MI
AMA District 14 (Michigan) Officer

afterhourscycle.com
Michigan's Beta and TM Race Headquarters
Reply With Quote
  #5  
Old 11-30-2012, 08:16 AM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 957
Cool 200 e-start

From what ive seen its about 1 k.
Reply With Quote
  #6  
Old 11-30-2012, 08:58 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

If your bike happened to come with a 2K-2 ignition, like my 250, you will need the 2K-3. Seems like GG may have run out of the "3s" for later '12 production. IMO its too heavy for a 200 anyway.
Reply With Quote
  #7  
Old 11-30-2012, 11:06 AM
twowheels's Avatar
twowheels twowheels is offline
Senior Member
 
Join Date: Oct 2009
Location: Dearborn MI
Posts: 1,860
Default

E start kits new in the box are priced as follows:

Nine bills if you're starting from a 2011 or older; $750 for a '12 or '13 (unless you can find a friend who no longer needs/wants his, and then its down to your negotiating skills).
__________________
Steven Beane #275
PlusOnePerformance - Superior Service the World Over - Dearborn MI
AMA District 14 (Michigan) Officer

afterhourscycle.com
Michigan's Beta and TM Race Headquarters
Reply With Quote
  #8  
Old 11-30-2012, 12:10 PM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 970
Default

less than 500 Euro for a kit in Spain:

http://www.greenlandmx.com/gas-gas-c...3-p-1-51-8570/
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #9  
Old 11-30-2012, 12:29 PM
twowheels's Avatar
twowheels twowheels is offline
Senior Member
 
Join Date: Oct 2009
Location: Dearborn MI
Posts: 1,860
Default

Quote:
Originally Posted by Anders View Post
less than 500 Euro for a kit in Spain:

http://www.greenlandmx.com/gas-gas-c...3-p-1-51-8570/
So about $650 +/- plus shipping and duty. Too bad for the home market that gets to pay 600 euros for the kit.
__________________
Steven Beane #275
PlusOnePerformance - Superior Service the World Over - Dearborn MI
AMA District 14 (Michigan) Officer

afterhourscycle.com
Michigan's Beta and TM Race Headquarters
Reply With Quote
  #10  
Old 11-30-2012, 08:29 PM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

Quote:
Originally Posted by twowheels View Post
E start kits new in the box are priced as follows:

Nine bills if you're starting from a 2011 or older; $750 for a '12 or '13 (unless you can find a friend who no longer needs/wants his, and then its down to your negotiating skills).
Any friends on here I can barter an E-start from?? J/K

$750.00 is not bad for an upgrade like that!
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
no start fastisbetter Enduro Engine 4 stroke (including EFI & Exhaust) 2 09-14-2012 05:22 PM
450 won't start please help Oldcow General Discussions & Announcements 41 08-29-2008 10:21 AM
When did it all start? Anarchist General Discussions & Announcements 4 07-22-2006 06:49 PM




All times are GMT -5. The time now is 04:26 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org