GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-22-2011, 09:52 PM
Bailey28 Bailey28 is offline
Senior Member
 
Join Date: Jan 2011
Location: Gainesville Florida
Posts: 317
Default Style of connector

Hey guys, I've been looking to add turn signals to my '10 EC300. I have the US bike that has several wires wrapped up in the airbox and by the front headlight.

I have in place the headlight, Sicass brake/tail light and the factory toggle switch. I really was wanting only front turn signals.

I looked and there are these funny two pin grey connectors that are very small. What type of connector is this? Is there a specific name for them? I don't want to go cutting and splicing if I don't have to, I would prefer to plug and play with as little intrusion as possible. Assuming these are the turn signal connectors of course.

Any help would be awesome!


__________________
'10 EC300 -- very happy
Reply With Quote


  #2  
Old 03-22-2011, 11:05 PM
Bailey28 Bailey28 is offline
Senior Member
 
Join Date: Jan 2011
Location: Gainesville Florida
Posts: 317
Default

OK, I looked at the wiring closer. In the front, I have a single spade connector with a white wire, another single spade with a yellow wire, and a 2 pin black and red wire connector. There is also a single round brass bullet style connector with a gray wire. All of these are "open" and are just tucked in with the headlight wiring. They are not connected to anything.

The parking light which has a 2 pin black and blue wire is not connected from where it comes out of the headlight pod.

In the airbox, I have only the black and purple 2 pin connector that is wrapped up, it is a very long wire. The 3 pin connector with the purple, white, and green wires are connected to the brake/tail light.

I do not have the factory turn signal/headlight/horn switch. I read in the manual from the scematic that the red/black may be the horn, and the others don't make any sense. Maybe the factory switch has the appropriate colored wiring on it, and these just feed into the switch?
__________________
'10 EC300 -- very happy
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
reshaping older style side pannels dirtjunky_uk Enduro Chassis & Body 0 05-23-2010 03:32 PM
style of riding pants do you wear and why? REVERUP GasGas Member Polls 29 01-31-2010 07:04 AM
new style tontonroger Pictures & Videos 0 03-27-2008 04:38 PM




All times are GMT -5. The time now is 08:22 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org