Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Other Bikes... > Other GasGas Bikes/Quads

Other GasGas Bikes/Quads Trials, Pampera, Wild HP, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 11-16-2010, 04:39 AM
2stroker 2stroker is offline
Member
 
Join Date: Oct 2008
Location: Almada, Portugal
Posts: 51
Default GG300 wild alternator

Hi,

How do we remove the alternator nut? Mine is a 30mm socket, and I dont know if it is rigth or left-hand thread. How do we block the crankshaft or flywheel, without damaging it?

I will be grateful for your help.


Reply With Quote


  #2  
Old 11-16-2010, 09:14 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

If it uses the same crank as the bikes its a normal thread and spins off with an impact tool.
Reply With Quote
  #3  
Old 11-16-2010, 09:42 AM
2stroker 2stroker is offline
Member
 
Join Date: Oct 2008
Location: Almada, Portugal
Posts: 51
Default

Quote:
Originally Posted by GMP View Post
If it uses the same crank as the bikes its a normal thread and spins off with an impact tool.
And how do you prevent the crankshaft to spin?
Reply With Quote
  #4  
Old 11-16-2010, 11:46 AM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

If you have the imact tool it will loosen it w/o it turning. They also make a flywheel holding tool or a piston blocking tool that keeps the motor from turning.
__________________
2004 GasGas DE250
Reply With Quote
  #5  
Old 11-16-2010, 12:24 PM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

A 1/2" drive air-powered impact wtrench will buzz it right off. You can hold the flywheel with your hand to keep it from spinning. A high-quality 3/8" drive impact will do it too.
If you don't have air tools handy take the spark plug out and feed about about 6" of 3/8" or 5/16" nylon rope onto the cylinder (leave the end hanging out so you don't lose it. It will lock up the engine when the piston comes up against it and shouldn't cause any damage.
It would be better to just load it up and pay someone at the local repair shop to buzz the nut off with air tools. Good luck.
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
  #6  
Old 11-16-2010, 02:02 PM
2stroker 2stroker is offline
Member
 
Join Date: Oct 2008
Location: Almada, Portugal
Posts: 51
Default

It is impossible to hold the alternator flywheel with hands. The nut (30 mm socket) is so tight that it will not come off with the impact wrench, because it make the flywheel to spin together with the nut.

May I have to diassembly the clutch to hold the other crankshaft nut?

I never tried to lock the piston through the spark plug hole.
Reply With Quote
  #7  
Old 11-17-2010, 09:08 AM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

This tool is designed to hold the clutch ot your flywheel, $30.
http://www.motionpro.com/motorcycle/partno/08-0008/

Here is the engine lock up tool, $11.
http://www.rockymountainatvmc.com/pr...dFamilyId=6067
__________________
2004 GasGas DE250
Reply With Quote
  #8  
Old 11-17-2010, 10:40 AM
2stroker 2stroker is offline
Member
 
Join Date: Oct 2008
Location: Almada, Portugal
Posts: 51
Default

I will try to lock the piston, since the rotor has a round shape.

thanks for help.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
please help hp wild 450 parts!!!! gasserwild Other GasGas Bikes/Quads 2 12-25-2019 10:44 AM
Raced My 2010 GG300 for the First Time Today 2whlrcr Off Road Racer's Corner 12 11-08-2010 09:08 AM
wild 300 and other 300's WILDGASGAS300 Enduro Engine - 2 stroke 1 10-26-2007 11:58 AM
MC65 has a working alternator bergerhag Enduro Electrical & Wiring 2 10-09-2007 05:34 AM
Wild 300 Hp PA300HPWILD Enduro Electrical & Wiring 0 10-09-2006 06:59 AM




All times are GMT -5. The time now is 06:20 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org