|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Banjo Bolt - Front Brake M/C
Based on a tip in another thread (from Steve Beane of After Hours Cycle), I replaced my switched front brake master cylinder banjo bolt with a regular bolt.
I was fighting a mushy feeling brake, regardless of constant bleeding. With the regular banjo bolt the brake feel is much better - mushy feeling much reduced. Honda part no. 90145-MS9-612 BOLT, OIL (10X22) is the same size as the switched bolt and mounts straight up. |
#2
|
||||
|
||||
Thanks for the part number. This has been on my to-do list.
|
#3
|
||||
|
||||
Which model/year honda is it off? I think I'll grab one too. Fluids are due to be changed and the brake lights disconnected anyway. I too have noticed a little sponge to the lever.
|
#4
|
||||
|
||||
The part number I listed was from a 2010 CRF450R, but I'm sure it's used on other Honda models too.
|
#5
|
||||
|
||||
Cheers. I work across the rd from the local honda shop. I'll pick one up next week. My poor bikes going through a period where its getting a lot of love and not enough punishment.
|
#6
|
||||
|
||||
Quote:
Nasty, ugly, cold fall is closing in here. Our friends in western Canada are full on into the deep freeze and snow at present. Here in southern Ontario, we're waiting for the ground to freeze up so we can transition to the studded tire routine. We just sourced some nice local, hardwood forest to cut single-track into. Gonna be a good winter of riding. Electric grip warmers and jumbo handguard muffs are my key to winter riding. Enjoy your Aussie Summer mate! |
#7
|
||||
|
||||
Front and back is the same on my 2010 and 2011.
__________________
2011 EC300 Six Days 2010 EC300 Nambotin Replica |
#8
|
||||
|
||||
Cool thanks. They look the same, but didn't want to have to bleed the brakes again just to find out. Thanks for helping me.
__________________
Blanco Current ride: 2009 WR450 Previously owned: 12 Gas Gas XC300R, 06 WR450, 06 YZ250, 05 Gas Gas EC250, 05 KTM 450EXC, 02 KX250 w/EG310 kit, 03 YZ250F |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How do you stop the brake pedal bolt from bending on the 2010/11 frames? | flo | Enduro Chassis & Body | 7 | 11-10-2013 07:16 PM |
front engine mount bolt | bonkeye | Enduro Engine - 2 stroke | 2 | 05-29-2013 03:39 PM |
Banjo brake light switch | Todd5774 | Enduro Electrical & Wiring | 1 | 03-03-2011 07:10 PM |
Rear brake rotor bolt clearance | Bailey28 | Enduro Chassis & Body | 0 | 02-27-2011 08:41 AM |
Clutch / Brake Banjo Bolts | iancp5 | Enduro Chassis & Body | 2 | 11-24-2009 04:14 AM |