|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Carb float bowl screws?
Need the 4 screws with washers that hold the float bowl on as mine are rounded of badly anyone know where i can get a set as from dealer there about ?1.50 per screw and they charge ?4 to post plus i have to use card over phone and give details ect and i have no time as i work all during there open hours.
|
#2
|
||||
|
||||
Try the local hardwear store. there metric size ,sorry cant help further w/ pitch etc.
|
#3
|
||||
|
||||
Just go to a hardware/fasnteners store and get some allen heads to replace them. Can't recall the thread size, but they are standard (maybe M4).
|
#4
|
||||
|
||||
I think they are 4mm.
there is only one pitch, as far as i know. i used allen head stainless steel with lock washers
__________________
2002 Husberg FE650e 2006 GasGas EC300 2014 Sherco SER300 2014 Beta Evo Factory 300 |
#5
|
||||
|
||||
4mm x .70 pitch 12 or 14mm long
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro |
#6
|
||||
|
||||
FYI. For the Keihin OEM float bowl screws, you will need a PoziDrive screwdriver. Not phillips.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help needed - EC 300 float bowl leaking | Speedchop | Enduro Engine - 2 stroke | 7 | 09-27-2019 01:34 PM |
float bowl hight | bonkeye | Enduro Intake/Carburetion - 2 stroke | 2 | 04-26-2012 03:01 AM |
Float Bowl Gasket - Alternative | Harry | Enduro Intake/Carburetion - 2 stroke | 4 | 02-08-2012 01:26 AM |
Carb issues - Float bowl? | Hicksi | Enduro Intake/Carburetion - 2 stroke | 7 | 10-19-2011 11:21 AM |
Float Bowl HELP! | gasIdaho | Enduro Engine - 2 stroke | 3 | 07-18-2007 09:30 PM |