|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
AS3 bendix cover 2018
Does anyone know if the AS3 bendix cover is machined properly or if it is the exact same as the OEM cover? Wondering if I would need to polish the hole where the bendix shaft sits like I had to do with the OEM cover.
|
#2
|
|||
|
|||
Quote:
Perfect! Plug and Play. |
#3
|
||||
|
||||
Do you have a link to it?
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#4
|
||||
|
||||
__________________
'18 Gasgas XC250 |
#5
|
||||
|
||||
Cheers matey!
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#6
|
|||
|
|||
Why did you had to polish the oem bendiz cover? i'm having problems with the starter i tried every thing i could came across.
|
#7
|
|||
|
|||
Quote:
Start with post #67 and read through the rest of the posts. I tried all of the updates too and nothing worked until this. It seems to have been a problem for quite a few people. Basically there was a batch of bendix covers that got machined improperly and isn?t allowing the bendix shaft to rotate like it should. It?s a very simple fix, the only thing you?ll need to buy is a bendix cover gasket because it might rip when you take the cover off. This was the reason for my question in this post. Wondering if the as3 cover was machined to the correct tolerance or if it is an exact copy of the covers that don?t fit. |
#8
|
|||
|
|||
Quote:
thanks for the info i was starting to suspect that, i did no tsee any reason for the mechanism to not work well, mine looks like it is jaming for some reason. I will try your solution. cheers. |
#9
|
||||
|
||||
Mine did not start on the button worth a pinch last year, but after a bunch of winter riding it seems to have broken in and start like fire all the time now. I expect the cold temps played a roll in wearing in the bendix cover.
__________________
2018 EC 300 |
#10
|
|||
|
|||
Quote:
The starter does only this: https://onedrive.live.com/?authkey=%...129763&o=OneUp I tested it with another battery, so the problem is not the battery, i did the wire mode, larger wires for positive selenoid and starter negative. Could it be the starter motor? cheers. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2018 ec 250 clutch cover | Leelee | Enduro Engine - 2 stroke | 3 | 02-13-2019 04:11 PM |
Weak clutch disc cover, EC 2018 | eralha | Enduro Engine - 2 stroke | 11 | 12-18-2018 03:46 PM |
Rekluse Clutch Cover for 2018 MY | Jacob 'Berg | Enduro Engine - 2 stroke | 10 | 05-30-2018 07:32 PM |
bendix help | Mostin3 | Enduro Engine - 2 stroke | 0 | 10-09-2017 05:48 AM |