Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 06-20-2009, 12:46 PM
darren's Avatar
darren darren is offline
Senior Member
 
Join Date: Jun 2008
Location: Stowmarket. England
Posts: 186
Default Polisport plastics.

Does any one know if i can make later model plastics fit on my 1998 EC250??


__________________
1998 EC250
07 Shivers
2T racing PV Spacer
FMF Gnarly
Reply With Quote


  #2  
Old 06-20-2009, 02:00 PM
2 strokes 4 life's Avatar
2 strokes 4 life 2 strokes 4 life is offline
Senior Member
 
Join Date: Apr 2008
Location: Grande Prairie, Alberta, CND
Posts: 678
Default

Quote:
Originally Posted by darren View Post
Does any one know if i can make later model plastics fit on my 1998 EC250??
The radiator shrouds from any year will fit all the way to 2009. The rear fenders changed in 2007, along with the number plates, and front fenders might need some bending to clear the frame but otherwise your all set.
__________________
2002 Gasgas EC250 (gone not forgotten)
2012 Ktm 300xc
2001 Gasgas EC300
Lifes journey is not to arrive safely at the grave in a well preserved body, But rather to skid in sideways totally worn out shouting holy cow what a ride !!!!
Reply With Quote
  #3  
Old 06-20-2009, 02:14 PM
Cruiser Cruiser is offline
Senior Member
 
Join Date: Jul 2006
Location: Jim Thorpe Pa
Posts: 1,280
Default

Not so fast,, rad shrouds for the 97 and 98 GG had different mounting locations,, both bolts were under the seat,, 99 they went with one under seat and one exposed.. If you do not have the cylinder head with the extra tall t-stat fitting you can install a 99 year fuel tank and then you get to install the newer plastic.. My 97 has the tall and the 99 tank interferes with the head.. Still looking into getting the right seat/tank shroud combo to work on my 97 or modding the head to get the newer style plastics..
__________________
Steve
16 Beta 350rr
04 KTM 525 sx/exc gone
03 KTM 625 sxc-rehab unit-did its job and now gone
03 GG 250 ec-gone
97 GG 250 ec Gone
Reply With Quote
  #4  
Old 06-21-2009, 09:18 AM
darren's Avatar
darren darren is offline
Senior Member
 
Join Date: Jun 2008
Location: Stowmarket. England
Posts: 186
Default

Thanks for the replys Just toying with the idea of putting an 09 six days plastics and graphics on me bike.
__________________
1998 EC250
07 Shivers
2T racing PV Spacer
FMF Gnarly
Reply With Quote
  #5  
Old 06-22-2009, 08:45 AM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

'02 and later also use side acces to the air filter which requires '02 and up air box and possibly subframe to fit the side panels. Not positive on the subframe though.
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
  #6  
Old 06-23-2009, 04:59 PM
darren's Avatar
darren darren is offline
Senior Member
 
Join Date: Jun 2008
Location: Stowmarket. England
Posts: 186
Default

Quote:
Originally Posted by jostby View Post
'02 and later also use side acces to the air filter which requires '02 and up air box and possibly subframe to fit the side panels. Not positive on the subframe though.
Thats a shame sounds like it will be more trouble than its worth. ill have to stick with my dated plastics for now.
thanks
for the response
__________________
1998 EC250
07 Shivers
2T racing PV Spacer
FMF Gnarly
Reply With Quote
  #7  
Old 06-24-2009, 11:06 AM
gasser's Avatar
gasser gasser is offline
Senior Member
 
Join Date: Nov 2006
Location: Cookeville, TN
Posts: 1,458
Default

If you would like to change from that faded pinkish red to yellow I have 99 shrouds, side covers, and front fender that are in good shape only $55 plus shipping. New 99 graphics are available on ebay for $30 and a new rear fender could be picked up for about $30 so for just over $115 you could have a brand new look.
Reply With Quote
  #8  
Old 07-19-2009, 02:52 PM
andy_scouser andy_scouser is offline
Member
 
Join Date: Jun 2009
Location: Lancashire
Posts: 18
Default

Darren, im about to fit 2006 plastics to my 2002 EC300, I went to see the Gasgas uk people in Buxton, they recommended 2006 plastics for mine (in red, didnt have blue). Give them a call.
Reply With Quote
  #9  
Old 07-20-2009, 06:26 AM
andy_scouser andy_scouser is offline
Member
 
Join Date: Jun 2009
Location: Lancashire
Posts: 18
Default

Just to confirm, the 06 plastics DO fit a 2002 bike (ec300), just finished fitting mine. They are actually better designed than the original gasgas plastics, a better fit too!
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Polisport Plastics 450GASGAS Enduro Engine 4 stroke (including EFI & Exhaust) 4 10-11-2010 07:32 AM
polisport plastics rear fender cdi mounting ? motorhead Enduro Chassis & Body 1 06-15-2010 09:38 PM
Old to new plastics fastfilli Enduro Chassis & Body 2 01-24-2010 09:04 AM
Plastics moto9 General Discussions & Announcements 13 09-19-2009 08:58 AM
Polisport plastic. Ud_luz Enduro Product Reviews 13 07-08-2009 01:32 PM




All times are GMT -5. The time now is 04:40 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org