|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Home made PFP adjuster tool.
I made my own PFP adjuster tool.
Our friendly MAC Tool guy came by the shop today. I saw an 02 sensor tool that I could modify as a PFP adjuster tool. The socket is a 22mm with a 1/2 square drive. $30 later I walked off the truck with my prized possession. I cut the tool to fit under my bars. I ended up going down to 5mm on the socket part. Here's the socket on the fork. There's a hole in the 1/2 drive side that I stick a screwdriver into for leverage. Works like a champ. |
#2
|
|||
|
|||
That's awesome!
I drew one up and printed it from ABS plastic. It works great but it is just plastic so it will likely break at some point so I'd like a permanent solution like yours.
__________________
2013 GasGas XC300E 2005 YZ290 1973 Honda CB175 1997 KX60 1983 Yami Tri-Zinger 1984 Suzuki Alt 50 1969 Trail 90 1971 Trail 90 1972 Trail 90 |
#3
|
|||
|
|||
__________________
-Keith '08 EC250 and some other bikes. |
#4
|
||||
|
||||
Molding and casing it might work
|
#5
|
||||
|
||||
Great Idea ! I will own one for sure .
__________________
IF I HAD ALL THE MONEY I SPENT ON DIRT BIKES , I WOULD SPEND IT ON DIRT BIKES |
#6
|
||||
|
||||
Quote:
It would not fit down into the fork cap. Plus, I wanted a 12 point socket to allow for a wider range of turning. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Home made skid plate, whataya reckon? | noobi | Enduro Product Reviews | 23 | 07-12-2010 02:44 AM |
Sachs shock compression adjuster? | SpeedyManiac | Enduro Suspension | 2 | 03-26-2010 02:13 PM |
Home Made Octane Booster | Boomhauer | General Discussions & Announcements | 3 | 07-16-2007 10:30 AM |
Home made disc guard | bergerhag | Enduro Chassis & Body | 5 | 05-14-2007 05:25 AM |
Manual Cam chain adjuster | MrSmooth | Enduro Engine 4 stroke (including EFI & Exhaust) | 16 | 12-25-2006 02:35 PM |