|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
S_Up,
Where are your clickers now that you've re-valved? Will the LTR mod help with these issues (minor for me). |
#12
|
||||
|
||||
I think compression is about mid-way and rebound fully in (more).
__________________
'05 Gas Gas 300 '97 Aprilia Pegaso 650 '99 KTM 200 '95 ish XR630 (died many times in Oz) |
#13
|
||||
|
||||
I should add I've not found the clickers to have a big effect for the sort of thing I was concerned about that was hitting big obsticles slow (say a tree root sticking out 1 foot high) or small objects fast (2-4 inch rocks at 30 mph + ) I obviously tried all the clicker settings before re-valving and the re-valve made a big difference.
I recorded the shim settings of you have time to try it - since I did not have a shim kit I just removed and re-ordered the shims so you don't need to buy any. I made larger gaps between the bigger diameter shims and reduced their number so that they could flow a lot more oil a lot easier. Initially I was aiming to get it too soft so that I had great ability over the type of obsticles above but would bottom out too much however it worked great and with standard oil height rarely bottoms out in enduro and never very hard so woudl seem about perfect.
__________________
'05 Gas Gas 300 '97 Aprilia Pegaso 650 '99 KTM 200 '95 ish XR630 (died many times in Oz) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
cool things found in the woods.. | stainlesscycle | Ride Reports | 28 | 02-15-2011 11:29 PM |
Gas Gas mods | pevs | Suggestion Box | 6 | 01-26-2010 12:22 PM |
Lighting up things with my 2003 MC250 | SideshowBob | Enduro Electrical & Wiring | 11 | 08-11-2009 07:30 AM |
EC 250 engine mods | DLS | Enduro Engine - 2 stroke | 14 | 06-03-2009 07:19 AM |