|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Wiring for dummies
Hi In an hour of madness i ripped some of the wiring of my 200ec (05) as i only want to use it for h & h/enduros. Well surprise surprise its not starting now so my question is what wiring do i need to keep on? left all the wire from the alternator to cdi unit and from there to the coil. took the oringinal kill switch out and mounted one on the bars. Is there a removing wiring for dummies anywhere? thanks
|
#2
|
||||
|
||||
Here is the tech article that I did for wiring lights and horn on my old 2001 XC250. The wiring should be the same.
Here is the tech article: http://www.gasgasrider.org/html/headlight___horn.html Here is the basic wiring diagram for GG's: http://www.gasgasrider.org/gg-wiring.jpg Here is the modified wiring diagram for using a DPDT (double pole, double throw) switch: http://www.gasgasrider.org/gg-wiring_DPDT_switch.jpg
__________________
Matt Current: 2009 Yamaha FZ1 Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165 |
#3
|
||||
|
||||
After posting the above, wiring diagrams may seen confusing at first but here are the basics...
HEADLIGHT:
KILL SWITCH: The typical kill switch is a two-wire switch (commonly, black wire and black with white stripe wire).
Hope this makes sense. Let us know if you run into issues.
__________________
Matt Current: 2009 Yamaha FZ1 Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
wiring for ac and dc | wence | Enduro Electrical & Wiring | 8 | 12-29-2009 01:08 PM |
Wiring schematic | marcp53 | Enduro Electrical & Wiring | 2 | 09-25-2008 04:29 AM |
wiring a MC | crem55 | Enduro Electrical & Wiring | 3 | 04-30-2008 07:12 PM |
Gas Gas 450 Wiring Diagram | Motarded1 | Enduro Electrical & Wiring | 2 | 11-04-2007 11:43 AM |
06 ec300 wiring? | jimbolaya | Enduro Electrical & Wiring | 3 | 08-28-2007 08:26 PM |