|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2013 300 or 2014 300 ?
So I am looking at the new bikes and thinking a 300 will work for me but what one ? I am a trials rider first and trail rider 2nd . Not good enough and to old with health problems to be a racer . So I am looking at some dual sport kind of riding but with great low end , power for the road and trail ? So is the 14 that much better that a leftover is not the way to go ? What mods would I need like the seat is not very comfortable I have read . I am about 200 lbs , will the suspension be ok ? Thanks for any input you may have !
__________________
If I had all the money I spent on dirt bikes , I would spend it on dirt bikes |
#2
|
||||
|
||||
13 or 14'
If $ is no object, i would go 14'. But IMHO , i am a leftover bike kind of guy. If i was that worried about weight, I would just train harder. Which would do more , than 14lbs less weight.
If you could ride the 2 on the same day,same course. Maybe the differences would sway you. And the 2014 GG's sure look sweet.
__________________
2012 xc300 - Great bike! sold looking for 18+ |
#3
|
||||
|
||||
Quote:
I would say either the 13 or 14 suspension wise will be just fine with trail riding. The is quite a bit of adjustment. Hasslebri has a nearly new 13 with incredibly low hours for a smoking deal somewhere on this forum. (General GasGas)/ Seat is a bit stiff if you ride sitting down. Mods wise you don't need much. Jetting is always #1, once you get it jetted for your fuel, elevation, and power and characteristics you will love the motor. I like my axle pull, and front axle nut. I crash my fair share and like my scorpion rad guards. They are tough. My favorite is the huge flywheel weight s3 makes. But if you go with the estart, it creates a very similar flywheel effect so you wouldn't need the flywheel weight in a estart.
__________________
2013 GasGas 300 2004 GasGas 200 2011 GasGas 300 Ortonville Minnesota |
#4
|
|||
|
|||
The 14 sure looks sweet but there are some good deals on a 13. Matto's has one in stock and will probably deal with you. I raced all the ECEA enduros last year so mine is set up for that.
The what you need to do to a 13 list Sub Frame upgrade Alluminum Skid plate Radiator guards Tall seat (gutz) Gearing 13/50 Bark busters Jetting Suspension by Budd (i'm a big guy) Trail Tech X bend bars (Least amount of pull back) Leo Vince Sliencer 14 break pedal (I broke 3 of the 13's this one looks more robust and with no bend I think will be less prone to breaking) YZ 250 kick starter Grip Heaters Rekluse clutch cover Rekluse clutch basket (All though the 13 is better than the 12 and may not be needed) Trail Tech Voyager GPS ( I do a lot of Trail work) As far as getting it ready for a dual sport I dont think much will be needed. Mattos had turn signals and computers all OEM GasGas that came off of a European bike, you maybe able to get a deal. Getting a plate was no hastle. I have had my 13 since fall of 12 I have about 140 hrs on it. I have had no major problems that were not self induced. I dont plan on riding as much this year but for 15 the bike will be rebuild and raced the entire season again. |
#5
|
|||
|
|||
Thank Wimpy for all the info mattos is close that means a lot to me . Good deal also is important . I am going to TTC in march and will try to go to see Clay and do some test riding . But I will take a ride up to mattos and talk to bud .
__________________
If I had all the money I spent on dirt bikes , I would spend it on dirt bikes |
#6
|
|||
|
|||
Hey Wimpy
Who are you ordering the 2014 brake pedals through? Motocrosscentre? Are they getting any cheaper? Thanks |
#7
|
|||
|
|||
Matto Cycle got me mine for around 120
|
#8
|
|||
|
|||
That's pretty good, I think I was looking at almost 200 to get to Australia
|
#9
|
|||
|
|||
On a 13' ? Aren't these already aluminum ?
__________________
Vindicator '11 EC 300R |
#10
|
||||
|
||||
Not for the US bikes.
__________________
Steven Beane #275 PlusOnePerformance - Superior Service the World Over - Dearborn MI AMA District 14 (Michigan) Officer afterhourscycle.com Michigan's Beta and TM Race Headquarters |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2014 TM's | adv rider | All Other Bikes... | 8 | 03-08-2014 01:28 AM |
2013-2014 Races in Western Washington | pscook | Western United States | 2 | 12-13-2013 04:00 PM |
2014 4t | BEEBOB | Enduro Engine 4 stroke (including EFI & Exhaust) | 17 | 11-23-2013 07:29 AM |
2014 plastic | adv rider | Enduro Chassis & Body | 2 | 11-21-2013 07:06 PM |
Prototype 2014 GG | gasgasman | General Discussions & Announcements | 8 | 04-13-2013 11:01 PM |